Recent content by hgueoso

Hi, any body know how to program the NEC IPK system with voicemail. I was able to change DID translation table to ring into incoming ring group extension assignment, but I don't know where to program to route the call to the voicemail after 4 or 5 rings no answer. Also, is there a way to...

Thank you, got it change, but now the line will take a long pause to dial it out! No perfect solution!

Is there a timer which I can program the NEC elite 192 with T1 voice to prolong the dialing of a number? A normal dialing works fine at our system. However, when we dial a number with a break ( 3 second or more to look for the rest of the number after area code), the phone will cut the line...

Thanks, ctvi, I used Hyperterminal and the screen showed password. I have try different password and got "I didn't understand that..." I have work on NEC elite VMS before, but perfect voice is my first time. Will the NEC elite manual work?

Currently, I am working on a Elite 192 with Teleco VMS(4). I can not connect to VMS with CoSession. The setting is 19200, eight, 1, and n. Trying to play around the dip switch on the top of the VMS card is no used. The card is always booting up in service. The BCLR is always flashing green...

Having a problem with KXTVA50 handling the call on a KXTA624 Phone system! [Eek!] The VM is configured with 2 company greetings and 2 Custom Service menus for 2 different trunk groups. My problem is when VM pick up the call and transfer the call, the line is drop and the intercom is keep...

I can program the Elite with the phone, and VM with the Cosesseion. Since I work a lot with Panasonic VMs, I am wondering if NEC is like Panasonic differentiate the line with different trunk number. How do I create a CAR key? Thanks ahead.

Currently working on NEC elite 48 with 4 port CMS VM. Is there a way to have 2 greetings on 2 different CO lines?

For some reason I can not program the Voicemail via windows hyper terminal. The voice mail is connected to KXTD1232 and it is functional. My port setup is (9600 8 None 1 None). When the voicemail boot up, I can see the VM boot up status in the hyper terminal window (For example, card test...

Can NEC Elite FMS or VMS provide different greetings for different incoming lines for Elite 48 and 192? If yes, how? Thanks Ahead.

Trying to program a Mark II system. I had the manual, but I cannot find anything regarding station port assigment. please help! thanks ahead.

Our company just bought a NEC CMS 4 port voicemail. I put the card into NEC Elite 48 slot 7, and I was lost when I need to assign the voicemail port. I don't know which port number I should use? I can not chage 01 and 02 in Memory block 7-2, but I can change 03, 04, and etc to DVM. By now...