Recent content by hellbeach

I´m answering my own question here.. I solved it by adding an old print queue and then setting each printer to serve the queue, then I can access the queue from the other network, worked like a charm.. /Dan

This seems like a hard case to crack. I´ll state the problem again.: * 2 nics in a NW6.5, ZFD7, BM3.9 box * Bind a printmanager to nic 1 * Be able to access the printers on PM from machines connecting to nic 1 and 2. It works fine to access the PM from computers connecting to the server on...

If you check my first post I stated that I was running NW65sp6 and BM39. Any way, I know I´ve seen a solution on an older server which was running nw51 and an older BM. The solution was an extra print queue which then was served by the PA or something like that.

Still no solution :( Seems unlikley that it would be impossible to print to the same printer from two nets if you have BM3.9 in between. I will keep looking...

Yeah, If I load ths NDPSM with both /dnsname and /ipaddress, it will choose the /ipaddress so that wont work.. I tried loading the NDPSM with /ipaddress=10.42.42.4 and then it worked to add printers from the other net but instead it didn´t work to add from the primary net. A possible solution...

I tried your tips but it didn´t work. I added 10.20.42.50 as a new A-record to the DNS-name adm-printmanager and then loaded ndpsm with /dnsname=adm-printmanager I got the same result as loading it with ip-address: When adding the printer in windows from the 10.42.42. net I get the error message...

Hello people We have a server with NW65sp6 and BM39. There are two nics with ips 10.20.42.50 and 10.42.42.4. 10.20.42 is the primary net on which most of the users are going to be, and iprint works fine on that net. I have configured the server so that a few machines on the 10.42.42. net can...

I added the server hosting the image server as a trustee on the volume where the image is located, this didn´t work. How do you mean I should grant "process rights" for the server on the volume ?

Hello everyone I have one server with nw6.5sp5 and zfd7sp1 and one server which only has nw6.5sp5: Is it possible to place a zen image on the server which hasn´t got zenworks installed and then use this image when shooting out images with pxe ? /Dan

we´re using iprint client version 4.15

Hmm.. check this out: http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=10090643&sliceId=&dialogID=23781907&stateId=0%200%2023791361

I´m using iprint. Terry: "Squirting it at logon" ? I haven´t put anyting in a login script, I´m pushing it out through workstation package.. or did I missunderstand you ?

I do push the printers via a workstation package and run at user login. I have changed the driver for a Laserjet 1320 from PCL6 to PCL5 but it won´t automatically push the new driver to the workstations...

Hello everyone We´re using NW6.5sp5 with ZFD7sp1 with iprint. I have a bounch of printers and I wan´t to update the driver which is installed on the client machines for these printers. If I load this driver into the broker and assigns it to a printer, how can I make the client machine download...

I just installed sp1 for zfd7 and it resolved the problem with a comp using pxe not always auto-downloading the images when it was set to image.