Recent content by hashashin

hi linney, Thanks for the reply I have already tried this fix with no luck It's just between these two pc's and I cant understand why? I mapped the two printers to the server and it prints as soon as I press return very strange I'm sure it's somthing to do with either the firewall settings or...

Hi all, I have two xp pro pc's on a network that print to each other’s printers Oki 321. They print via the net use command “net use lpt2 \\username\oki321 “under windows they print fine and quick but dos (dir > lpt2) can take up to 30 seconds has anyone come across this problem I have other...

Just want to thank everyone, I had the same problem when I eventually got into the server after nearly 10 hours of applying settings... rebooted in safe disabled the apc services, restarted, and the Job was a good un. Thanks again.

yeah FaiTHLeSS I think your on the right track there mate any idea on how to test or impliment you idea, I'am not the sharpest tool in the shed... Cheers Joe.

Thanks for the replay Guys :) I dont have two subnets I have two ip ranges, and i'am not using ics, I'am just trying to access the lan ip of the netgear router i cant access it if the ip range is 192.168.0.1 if i change it to the lans range if 192.168.1.1 i can then ping it but i'am unable to...

Thanks for your replay ChicagoTechNet, win2k server is dhcp it's range is 192.168.1.2 - 192.168.1.30 subnet 255.255.255.0 i have reserverd the xp pro pc to have the ip address of 192.168.1.17 for the lan the second nic in the xp pc get it ip address from the netgear dhcp hub's range is...

I have a windows 2000 server that assigns ip address to the 15 clients. The range is 192.168.1.2 <-server 192.168.1.30 I have a Windows xp Pro client in the network with Two nic's one for the Lan and one for the cable broadband, the broadband routers ip is 192.168.0.1 and this is where my...

I have a small network, 1 win2k server which is going to replace a Novell server. The problem I have is a win98 pc has two network cards installed 1 card takes care of the Lan and the other card has a Teleweest broadband modem attached, Now the clients all run tcp/ip and ipx/spx and get assigned...

well thanks guys it worked. But they where both setup as dhcp, so when i hooked them up i had to turn it off on one server, and give the clients a static ip. It gave ip to a machine in production. but all seems ok. Once again many thanks.

thanks guys, so as long as the domain names are different and the ip's and subnets are also I should be ok. Thanks again.

If I connect two seperate networks Nt4 Pdc's together on the same switch. will I get any errors / clashes. has anyone done this with success? Thankyou.

I work for a small company, and we are about to buy a new printer 25k's worth of Konica finest. I have two nt4 servers one accounts and one production both on seperate lans both pdc's and my boss wants everyone to print to this thing. Now I'am worried that when I connect both lans together they...

I will soon be putting in a win2k server, we already have a nt server running small business and exchange. Now can I use both servers toghether using the SBS to pick up the e-mails and the 2k for logins and file sharing etc.. And what is the best way going about this task. Any help would be...

Have you altered any options in the Bios, Such as power savings, apm or plug and play? I had a simmiler problem until I reset to defaults. Good luck

cheers Glen but I have already tried this, My next plan of action is to break the mirror and place one harddrive in a backup machine, does anyone foresee any problems in doing this?