Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by hasch

  1. hasch

    snmp poll fails

    Are you sure that the snmp is enable oh your servers ?
  2. hasch

    SNMPWALK Information

    You can also do a snmpwalk ip system ,for instance, that will give you the system information or yuor agent, yopu can replace system by other therms as well.
  3. hasch

    SNMP auth faillure trap

    No it's not a IOS issue, in my NMS i reformated the auth faillure trap and i was able to see who was generating those trap, was 2 servers since we changed network they polling with the wrong community name so we changed it. Thanks
  4. hasch

    SNMP auth faillure trap

    Thank you John, i will try this out tonight, first on one CAT 1924, since it's layer 2 , i will disable the logging console and enable the logging buffered.
  5. hasch

    SNMP auth faillure trap

    Thanks for the answer. But i found that a bit risky to iniate a debug command, to be honest i have no idea how is traffic that i have on those switches, they are new in the network, we just integrated their network to our, honestly i am afraid to have to re-start the switch. Any idea ?
  6. hasch

    SNMP auth faillure trap

    Hello, I have some couple 4006 and 3750 CAT switches and into my NETVIEW console i receive a lot auth faillure trap coming from 2 switches, i know that i have no problem with my snmp config from my devices so i suspect either a server or station that does that, any specfic anyway to find out...
    • hasch
    • Thread
    • Replies: 7
    • Forum: Cisco
  7. hasch

    traffic capture

    Thanks, but pcap has to be on the arn, right ? Sorry but this nortle thing is new for me. Thanks again.
  8. hasch

    traffic capture

    Right pctap but for this you need to be connected directly to the router phys. So does not work :(
  9. hasch

    traffic capture

    Hi I was wondering if there is anyway to capture traffic on ARN without using a sniffer. I work on a network with around 200 locations that run arn, we use a consolo as agent for snmp, i was wondering if could use soemtyhing to capture traffic packets from this console ? or anything else. Any...
See more

Part and Inventory Search

Back
Top