Recent content by hasanjan

My first question : is how can i analayse the dump, when system crashes. Aix 53 Ml 04 is installed . the command crash and kb (kbd) are not installed. 2nd question : How can i install the command kbd or crash for aix53, are this command on regualr aix OS-CD´s ? Thanks

I have instaled a IBM intelli P-185 with mksysb CD. (AIx 5.3 ML 04 ) I have chanded IP and etc.. and after reboot, i get message on display /tmp mnt faild ? What can be done witout new installation Thanks in Advance

Hi , on my Server IBm P275 runing AIX 5.1.0.0 have Problem with HP DDS 4 Tape devices. The scsi Tape device will not be recongnised. I have removed the Sw , reinstalled the scsi tape devices Sw and run cfmgr but Scsi Tape is not recognised. I run Diag and follwing message apears: The Service...

/etc/hosts is ok Traceroute : trying to get source for gkwi48 source should be 10.50.45.199 traceroute to gkwi48 (10.50.45.204) from 10.50.45.199 (10.50.45.199), 30 hops max outgoing MTU = 1492 1 * * * 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * *...

Now the Problem ist from this host i can´t ping any host in the same subnet where this host, ping all other hosts in other subnet are ok

i have removed the second gateway , but still same problem netsta -rn : Routing tables Destination Gateway Flags Refs Use If PMTU Exp Groups Route Tree for Protocol Family 2 (Internet): default 10.50.45.1 UGc 0 0 et0 - -...

Hi all , I have a Intelli P275 and AIX 5.1.0.0 and ent1 Available 1j-08 10/100/1000 Base-TX PCI-X Adapter (14106902) Problem: Sometime i can ping a remote host, and sometimes can´t ping the same remote host. tracerout to remote hots: trying to get source for 10.128.76.143 source should...

Hi I need to change the speed of mouse Ihave no CDE avalible , there is also no smitty menue for that 1. how can i change the mouse configuration by command ? 2. how to make the num lock on by login ? thanks in advance

I have tried to update an different Client, with smitty update_all in Maintaince mode, and installed AIX ML 10 and GXT4500 drivers and some other patches and it worked fine but only oslevel says 4.3.2.0 all filestes says 4.3.3xx thanks again for your Help

Hello , some error Messages you can find on AIX Documentation CD

Hello , I have updated first firmare of 43p/150 then smitty update_all with AIX 433 IBM CD´s 439 filestes were updated STATUS SUCESS all comited aber reboot sys hangs on SMS , last display Value is c31 , also tried reset button few time . stillsame then tried bosboot -a -d /dev/hdisk0 -> Same...

Hi How to turn NumLock ON by Login or starting an Application ?

TX a lot Where can i get this "maintenance package for upgrades from 4.3.any to 4.3.3 " ?

I have to install an image (mksysb) AIX 4.3.2 on a 44p/170 with GXT 4500 The mkysysb is from 43p/150 Do I have to upgrade the System to 4.3.3 or are ther any Patches for Aix4.3.2 for GXT 4500 ?? In Case of Upgradeing to AIX 4.3.3 , can you give me some hints how to do it tanks in Advance Hasan