Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by guysmyley
-
Inbound Telnet Access?
from a pix textbook: There are some restrictions on Telnet depending on the interface you use. The inside interface allows Telnet without encryption, whereas encryption (through VPN) is needed for the outside interface- guysmyley
- Post #5
- Forum: Security, hacker detection & forensics
-
PIX-3-305005: No translation group found .....
I think in the static statement you need the higher security inside IP address, instead of the dmz address. It should be: static (inside,dmz) 10.180.8.1 10.180.8.1- guysmyley
- Post #2
- Forum: Security, hacker detection & forensics
-
New PIX 515E no info passing anywhere
I think if you are trying to access a public IP (147.x.x.x) on the internet with a private IP (10.x.x.x) the address needs to be natted to a public IP or it wont be routed over the internet. I think you can use a static (inside,outside) public IP private IP or global nat combonation of commands.- guysmyley
- Post #20
- Forum: Security, hacker detection & forensics
