Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Gutsanglory
-
No internet connection
Now its working again, the only thing i did was turn on debug icmp trace, and ping the gateway....and i noticed its working now....... sheesh..... Im baffled. (hardware??, the pix is Brand spankin new) Guts- Gutsanglory
- Post #7
- Forum: Security, hacker detection & forensics
-
No internet connection
Ok...thought I had it fixed, but when i started fresh with a "config factory-default" and set it up again, its doing the exact same thing. Everything looks like it should work, but it doesnt. I have played with it all day without success. I noticed that when trying to do the setup from the PDM...- Gutsanglory
- Post #6
- Forum: Security, hacker detection & forensics
-
No internet connection
Hi, I think i found the issue, I checked the arp table, and found an entry for some unknown wan ip, listed first. I think it may have gotten the ip during the startup and DHCP on the outside interface. (which I removed and set static) Anyway, I cleared the arp and all of a sudden I can ping my...- Gutsanglory
- Post #5
- Forum: Security, hacker detection & forensics
-
No internet connection
Im not sure which access-list I would need for basic connectivity to the internet for the inside to the outside. Can you give me an example? I thought inside to outside access (from high to low) was allowed whithout access-lists. thanks, Guts.- Gutsanglory
- Post #3
- Forum: Security, hacker detection & forensics
-
No internet connection
Hi all, I have a dead simple setup, and yet there still must be something wrong with my Pat and default gateway setup, as the inside has no connection to the internet. internet <---> Pix506e <---> LAN I am able to ping the pix inside interface from a workstation. From the pix I can ping both...- Gutsanglory
- Thread
- Replies: 7
- Forum: Security, hacker detection & forensics
-
Saving existing Image and PDM
Ok....yes..thats what I thought, I have downloaded a fresh copy of the Image and PDM just in case I ever need to reinstall them, and have copied the sh ver and sh act to a text file. Thanks, Guts- Gutsanglory
- Post #3
- Forum: Security, hacker detection & forensics
-
Saving existing Image and PDM
Hi all, have a new Cisco 506e and its preloaded with the latest: Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4) The activation key is already installed for these features: Licensed Features: Failover: Disabled VPN-DES: Enabled...- Gutsanglory
- Thread
- Replies: 3
- Forum: Security, hacker detection & forensics
-
Cisco 2611 Nat/ static route trouble
Hi all, thanks in advance for any help. I have a 2611 that i am using as my edge router to the internet. (static IP/cable modem)I am trying to get it working smoothly, but have found a few problems. I have setup NAT and all my local machines can access the internet faily well, but none of the ip...- Gutsanglory
- Thread
- Replies: 2
- Forum: Cisco
