Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by gtechjoe

  1. gtechjoe

    Call Pilot 150

    That's correct allworxguy. In addition I finally was able to find that the when your in the paths of the CCR tree you press next and the alternate path will display for recording.
  2. gtechjoe

    Norstar T24 KIM

    I agree with Curlycord.
  3. gtechjoe

    Call Pilot 150

    Can't seem to remember what paths to use after recording the alternate language path greeting. I know the main Home path "0" as well as the regular paths (i.e. Path 1, Path 2, Path 3 etc. Please help my mental block.
  4. gtechjoe

    Telephones Displaying Numeric Characters instead of Alpha Numreric characters.

    Did not realize Avaya was still supporting KRS. I will reach out to a fellow Avaya authorized vendor for assistance. Thank you again Curlycord. As usual you have been a great asset to this forum.
  5. gtechjoe

    Telephones Displaying Numeric Characters instead of Alpha Numreric characters.

    Thank you for your input Curlycord. Not sure what or who KRS is.
  6. gtechjoe

    Telephones Displaying Numeric Characters instead of Alpha Numreric characters.

    Yes Curly, when you lets say call someone's extension through intercom, instead of the programmed name displaying on the phone you will get a number display. Example: I call Brooks extension number, it displays a random number like an 8 or 5 instead of Brooke's name. They did mention they have...
  7. gtechjoe

    Telephones Displaying Numeric Characters instead of Alpha Numreric characters.

    Customer has Norstar MICS 0x32 KSU with 7.0 Rls Software. Problem is that some of the phones are displaying Numeric characters instead of Alpha numeric characters on their displays. I recycled the power and seemed to have cleared the problem but customer informed us that problem is back. Is...
  8. gtechjoe

    CCR Tree on Call Pilot 150 Rls. 3.1

    FYI. Ok I remotely accessed the Call Pilot 150 3.1 and found that the customer had activated the Touch Tone Gate on Greeting #1. I disabled it and voila it cleared the problem. Hope it helps you guys in case you run into the same issue.
  9. gtechjoe

    CCR Tree on Call Pilot 150 Rls. 3.1

    Hello Again. There is a correction on my post. The trouble is not with the CCR Tree it is with the company greeting #1 in the auto-attendant. If someone wants to transfer a call to an extension they have to dial 9 and then the extension number. After the CCR Tree comes on it will transfer calls...
  10. gtechjoe

    CCR Tree on Call Pilot 150 Rls. 3.1

    Customer decided to program their CCR Tree 1 and now when the Tree answers it will not transfer to any extension until you press 9 and then the extension number. Any thoughts?
  11. gtechjoe

    BCM50 Call Pilot Auto Attendant

    Hello curlycord, Hawks, allworxguy, cook1082 and snowman50. Turns out the problem was with the customer's service provider not recognizing the DTMF signaling. Their Adtran was the culprit. There are still some digits not being recognized but at least their provider is aware of it. I want to...
  12. gtechjoe

    BCM50 Call Pilot Auto Attendant

    Hawks, the main console (Target #133) and several other extensions have target lines pointed to them and they do ring accordingly. I created CCR Tree 1 and tried pressing digits after the CCR tree home menu came on and still having same issue where any digit I enter on my dial pad the greeting...
  13. gtechjoe

    Hunt Group

    Thanks allworxguy. I appreciate your response.
  14. gtechjoe

    NAM Problem

    Make sure attendant is also assigned in greeting table.
  15. gtechjoe

    Hunt Group

    I programmed Hunt group HG01:707 added three extensions (221,233,307) Line Assignment: 8 lines directly to the hunt group, used Distribution Mode: rotary, Hunt Delay: 2,Busy line setting to: Queue mode with delay of 15, Overflow: to one of the HG extensions:221. Checked extensions and they all...
See more

Part and Inventory Search

Back
Top