Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by gripper99
-
Managing non Cisco Devices with CiscoWorks
htjyaa (1) CW should discover the node. From then on in you should be able to extract SNMP data from the agent by default as CW loads the correct MIBS for most Cisco devices. The only thing which could bar this is the SNMP community strings on the device MUST correspond with CW. With regard to...- gripper99
- Post #4
- Forum: Cisco Systems: CiscoWorks2000
-
Managing non Cisco Devices with CiscoWorks
Jim With great difficulty. It's how to interrogate the SNMP agent on your Timeplex hardware and how to interrogate the SNMP Traps when received when something goes pear. If you had purchased NNM you can load multi-vendor MIBS into the software which will enable you to do the above. You could...- gripper99
- Post #2
- Forum: Cisco Systems: CiscoWorks2000
-
Help with a CW2000 Filter
Hi CW2000 is "polling" (in NNM terms) subnets which are ISDN. How can I write a filter to stop this happening ?. Basically strict the discovery of CW2000. Thanks in advance Gripper- gripper99
- Thread
- Replies: 0
- Forum: Security, hacker detection & forensics
-
Host file on Solaris instread of DNS
Hi Mixing DNS and a static hostfile isn't a good practice. Their is a file in /etc nsswitch.conf which states your order of getting requests but it really doesn't work too well. So it must be on or the other. A better way may be to enable a local DNS cache on your Solaris server. (1) Edit...- gripper99
- Post #2
- Forum: Cisco Systems: CiscoWorks2000
