Recent content by grazman

Have you checked to make sure the power profile isn't allowing the network crad to let the computer go into sleep mode? It sounds like you need to let the power profile not do anything and see if the problem goes away. When older machines hard drives go idle for power saving, the requests...

Is this thing toast. Connecting with a console cable, I get VxWorks ended with an exception. Attaching to interface ... it repeats, reboots. Is there a way to get into the factory config on this at this stage and clear what is there, or it the unit fried beyond use? It's a P333T, I'm not...

Marvin is right on the money. It does all depend on what type of remote access you need. I install Novell Client on my home PC to authenticate to a remote server (no scripts/drive mappings). Then I connect to the server with Adrem's remote console software. www.adremsoft.com Worked on...

You set up nameservers in INETCFG type INETCFG at the console go to Protocols>TCP/IP>DNS Resolver Configuration type in your domain name and your nameservers you are trying to us. ESCAPE out, save/update the information. Go to the bottom of the INETCFG menu and choose "Reinitialize...

Do you have the HTTP server enabled? If so, disable it (requires a reboot after doing so). http://www.securitytracker.com/alerts/2002/Jul/1004867.html

Reboots have been seen due to a bug in the router code. Had something to do with NTP port scanning. Upgrade to the latest release v2.5.0.R5.QVPN See if that helps.

The FR dlRcvNotUI INFO frame-relay.1 - dl rcv packet dropped, not UI frame, 32 message is a setting that needs to be changed on the other end. Proxy arp needs to be set differently on the other end. if it s a cisco router at the other end and the config reads no ip proxy-arp then...

Connect via console cable with a serial port emulator. Reboot it. When the screen says press ^C^C, do so. You can then type config_clear y reset It will wipe it to factory defaults. Username admin, no password.

I've seen this before when the driver in NDPS is pushed out as a PCL6 driver (same thing when printing GroupWise messages from some PC's with PCL6/PCL5e drivers, comes out with arabic characters). Try changing the driver on one PC manually and see if that works.

Rather than uninstall McAfee, try shutting down Arcserver and installing the trial version of backup exec and performing one backup to see if it resolves the problem WITH McAfee running. At least then you'll know if it is McAfee or ArcServe. I'm assuming Arcserve is running on the server and...

sorry, typo, use Set Client File Caching Enabled=off

At the server type set client file caching = off and see if this helps.

For what it is worth, I've found that using a Traditional Volume with Legacy BTRIEVE applications running on Win2k/XP instead of NSS volumes has made a difference. If you have an XP or Win2k machine with FAT32 instead of NTFS this may also work differently.

Right-Click the N in the system tyray. Choose "Novell Client Properties". Click the "Advanced Login" tab. Uncheck "NMAS AUTHENTICATION", click "OK". What is set by default is that NMAS Authentication is enabled in the client version. There is no need to...

Netware 6 installs NSS volumes by default. Create a Traditional File System volume and out Peachtree there. I've done this on a Netware 6 SP3 server with all the latest patches (NSS included) and it works like a champ. Rmemember to set set maximum record locks per connection = 4000 I'd also...