Recent content by goodweb

Is there a windows or a software solution to adding a password or hiding a Windows98 workgroup? I would like to have multiple workgroups in the Intranet without having access to each other. GoOdwEb's Internet Cafe http://www.goodwebs.net

The channel interface and demarc is about 35 feet from the kentrox box and router (Cisco 2501).. I ran a straight thru CAT5 between the demarc and the kentrox box, keeping away from all possible sources of noise and interferance. Sound OK? gw GoOdwEb's Internet Cafe http://www.goodwebs.net

Does one NEED to use a shielded Kentrox cable between the demarc and the router or can you use a straight thru ethernet Cat5? GoOdwEb's Internet Cafe http://www.goodwebs.net

The leases are only for 48 hours. (1) If I were to delete the dhcpd.leases and kill the dhcp server, when the rogue boxes attempted to renew, would it kill their connection or would they remain connected using the already aquired IPs? (2) If I were to designate the mac and host of the rogue...

All things would be settled if I could get access to the router... but the ISP techs are lame and want me to deal with the issue with the other company... who in fact.. are lamer than the ISP!! So.. there is no way to discombobulate the IP lease renewal by making my dhcpd.conf all goofy.. I...

I have a dhcp server running (RH 7.0) assigning IP addesses from the top half of a C-Block. The other half of the C-Block is used by another business in another part of the building we are in. They "accidently" plugin PCs without assigning IP addresses out their block and end up...

it still works... it just displays eight (8) incidents of the drive as different drive letters.. does not matter which one you use either.. they all will access the drive.. i would like it to be just a single drive letter.. ie.. E: and get rid of all the other ones.. GoOdwEb's Internet Cafe...

there are two drives on the secondary IDE... secondary master is the origonal CDrom drive.. the secondary slave is the new burner... should not make a different which is the master and which is the slave.. GoOdwEb's Internet Cafe http://www.goodwebs.net

Quote: "The origonal CDrom Drive is set as the Primary Slave and the new Sony CD-RW is the Secondary Slave." Every thing checks out.. jumpers and cmos GoOdwEb's Internet Cafe http://www.goodwebs.net

I just installed a Sony CD-RW in a K62-400. The Hard Drive is set a the Primary Master. The origonal CDrom Drive is set as the Primary Slave and the new Sony CD-RW is the Sencondary Slave. Cmos reconizes these drives in this configuration. When I rebooted the PC and veiwed the drives from...

NT has to be installed on C:\ as NTFS or Fat16 GoOdwEb's Internet Cafe http://www.goodwebs.net

AMD 1.2g Athlon, Win98SE, 3Com 905b-TX 10/100 NIC, connected to 100M LAN. Can not get a data transfer over the LAN any faster than 80K/sec.. All the other PC's have accomplished between 5meg - 8meg/sec. I've switched NIC's, Cables and PCI slots. RWIN set to 56400, MaxMTU to 1500, MSS 7240...

Our Internet Cafe, in Missoula, Montana, has a dual T1 connection to the internet with 8 computer stations. We also provide LAN stations to bring your own computer in to hook up. we serve coffee, soda, snacks, etc.. Our patrons are mostly gamers. There is no DSL or Cable available around...

I discovered that the problems was due to registry errors and merged folder registry info from another machine in the culprit. That took care of the problem. Thanks! GoOdwEb's Internet Cafe http://www.goodwebs.net

did you try restoring a previous working version of your registry? boot to DOS type: C:\>scanreg /restore GoOdwEb's Internet Cafe http://www.goodwebs.net