Recent content by goobis

Yes it's set to Auto Answer and you don't get the fax tone which makes me believe it's something with the signal, maybe it needs to be boosted for the fax to pick it up. Since it's backfed throughout the house to the Telephone lines. What do You think?

I have Comcast Digital Cable and i am using Voip, my computer upstairs is connected to the cable modem and is backfed to the other phone lines in my house. My new fax machine in the Office in my basement will send faxes but not receive them, it is a Ricoh GX3000sf Model. I am using a filter...

Hi All, could use some help , I'm using XP Home Ed. and my computer is acting weird, can't tell if it's from updates or some Virus. The symptoms are : 1.can't open video files recorded on ATI AIW 2006 edition video card with ATI software or WMP. 2.When trying to open Microsoft Office apps it...

Hey cdogg In Windows XP, Control Panel/Hardware/Device Manager under IDE ATA/ATAPI Controllers There is NVIDIA nForce3 250 Parallel ATA Controller. Under that, is a Tab Primary Channel in that, is Master Drive. In that Tab, There is the...

Thanks for your input folks. OK, Here's what I did, I went back into the Bios and enabled it to auto-select my DMA Transfer mode for my Hard Drive and Disk Drives, and I changed XP's,(Control Panel/System/Hardware/Device Manager)setting, in the ATA/ATAPI Controller back, to let the Bios set DMA...

Hi Micker377 Yeah,I did that,My motherboard uses a NVidia nForce 250 Parallel ATA Controller(v2.6)and I set it to Ultra DMA 5. It was Set to (Let Bios select transfer mode). Along with making those changes I went into the Bios and disabled the IDE Dma Control setting too. Now in my ATI All...

Hi I just recently Upgraded my System: MOBO:Abit NF8 Proc:AMD Athlon 64 3000+ 2.01Ghz OS: Windows XP SP1 Video: ATI AIW 9800 HardDrive: Western Digital - WD1200jb 120gb DVDRW: Lite On SOHW 812S CDRW: Yamaha CRW-F1E NVIDIA nForce 250 Parallel ATA Controller (Onboard) After Installing the Video...

Hi I have a Motorola Wr850G Router Connecting a Network of 2 Computers (1 Tethered and 1 Wireless)and would like to expand it to another computer on the 1st floor. I can't get a good signal and was told by a Mototrola Tech that I would need an access point to acheive this. My ? to you is do I...

Hey guys. Could use some help here,I had a hard time upgrading from ME to XP home edition,I went through the advisor to find only minor programs and devices that weren't compatible,so before installing XP,I removed them to make it a smooth install. It wasn't Smooth at all. I have 2 40 gig HDs 1...

Hey folks, No I don't think I will use the Refrigerator Method, But I did get my hands on a copy of Hard Drive Mechanic and the Fat File is Majorly corrupt. I think. Does anyone know how to use it, I didn't get any instructions with it. I made a Boot Disk, removed autoexec & config sys as it...

Hey guys, I have 2 40 gig HD's 1 good and 1 bad,it gets to the Windows ME screen but just stays there, with the blue bar at the bottom endlessly scanning across.(Yes both HD's have ME). Now for a Brief time, I was able to see the data on the bad HD, when I made it a Slave to the good one. But I...

Until Recently(after changing popup kiler to Filter gate) I started getting Hiccups in my Windows Media Player while watching videos. I checked another media divx player and it did the same thing. I have run Scandisk and Defrag to see if maybe they would help, but still the Hiccups continue only...

Thanks for Writing back to me,I'm running Windows ME for the OS, and the types of recording i've been doing are music(mp3 & CD), archiving files and making backups of games. Also,Yes,I have changed IDE cables, a couple of times. I even tried a 80 pin cable to see if that would help and nothing...

Hi Guys I need Some Help, Back in July I bought a Norcent 32x10x40 CDRW Burner,it worked fine for about 3 months,then every time I put a Blank in it wouldn't read it.Through thier Tech Support I was advised to upgrade the BIOS, and I did. And still it would come back reading,player was empty...

Thanks for your feedback Guys, 346, to answer your 1st ? I meant the Internet(Each Pc connected to the DSL/Modem standing alone worked fine).But what I failed to do,was Delete the Software that came with DSL(Enternet 300)and use only the Speedstream 2601 Config Page that was on the disk that...