Recent content by goluman

in the etc /services remove the hash from pop3d entry besides which 110 port is also mentioned.ALso in the sendmail .cf remove/delete the entry just below this # SMTP daemon options DELETE THE LINE THAT APPEARS HERE!!! # SMTP client options #O ClientPortOptions=Address=0.0.0.0 where it...

Hi man Interesting problem,The way i see it you will have to design the circuit yourself.You have explained how you would detect the presence of a NIC by checking for the shorted pins.What i suggest now is that you find out the time each PC broadcasts.(in TCp/IP every PC broadcasts its presence...

Set up a proxy on a gateway behind the router.Set that address on your Net browsers etc.Also relay your mails to that IP (if you have Outlook,exchange,send mail etc)I dont know how lotus works).It will work fine.We have two routers too.

Hi Jherax, Try using a cross cable (a UTP cable with the Rx/TX crossed over)it will solve your problem:)

hi shrigz in our case we have a token ring And Giga bit based LAN and Mail and Intranet from leased lines from ISP's so we do have several gateways,but One router. To access mails and Internet you can have OUTLOOK or maybe sendmail of Solaris,linux etc,these can be forwarded to a gateway with 2...

By a rule of thumb you cannot cascade more than three layers of hubs.By cascading it is meant that from one hub you connected another,from there you connect the next one and so on.This degrades n/w performance beyond aceptable limits as the hubs bring all nodes on the same collission domain. You...

I just faced this problem yesterday,i solved it by changing the domains of both PC's (both were win 2K) and creating a common ID user on both,it worked well)

I loaded my Winnt 4.0,server,with Sp 6-a ,running MSProxy 2.0,IIS-4.0 etc,It crashed my system,RAS and RAIUS woudnt stat after that.Had to reformat,works best without any problems with Service PAck 5. Maybe service pack 6-a has bugs

We are using Desk top based Video COnferencing systems using D-Link USB cams and Microsoft NetMeeting 3.0 s/w.I have limited the bandwidth to 128Kbps(even though we have T1 LAN)and i am getting about 25fps,which is pretty good,no echo worth mentioning.good refresh rate.

Faster Internet speeds generally is the cause of this.

Audio is already available in MSN messenger 3.0 and upwards.

shield the cable in PVC dconduit and signal quality improves dramaticaly

Hi i have set up Videoconferencing for my company ,very cheaply and successfully.The refresh rates and imag quality are Real time ,more than 30 frames per second. I have used a USB based WEB cam (DU-C300/560) and Microsoft netmeeting software does the rest for Poit to point.Thouh i should tell...