Recent content by gok

I work with Phoneguy15 and what we ended up doing was creating a SMTP server on our local VMPro machine. We pointed the customer settings to our external address associated with that machine and relayed it to our ISP's SMTP. For some reason we could not have the IPO point directly to our ISP's...

Finally figured out the problem. The telco provider was also on a 20 second timer to route the call to their voicemail. Even though we had them turn off the service, it seems as if their coverpath was still there. So at 20 secs, embedded would answer but the call was routed by the telco to...

yeah adjusted the gains and its still the same.

update: changed software to 8.1.65. call in, answer the phone and transfer the call to a mailbox, works fine. call in, wait for hunt group voicemail to answer, it still goes to dead air. system status shows connected to #Main and it wont release the line. manual pull line cord from port to...

so rolled it back to 8.1.52 and the V2 combo card no longer sees its daughter board....FML

Haven't tried anything yet this afternoon, they are a title company and they are doing closings this afternoon, and the only way to the comm closet is through the closing room.

I agree, simple little 8 phone 3 line system with 1 mailbox and its giving me this much hassle. At least its the company that shares the building with ours so I don't have to drive across town to work on it.

Already mentioned that I did a format and recreate on the SD card, still didn't help.

I was mistaken, it is on 8.1.67. So I guess I'll try rolling it back.

Queuing is already turned off. There currently is no overflow group so that timer is not in the equation. Like I said, I can watch the call in active calls on system status and I see when it stops ringing to the group and goes to the mailbox for the Main HG. Thanks for all the replies so far.

yes, active for all calls.

Yeah, I've built short codes that point to the main hg mailbox and the greeting plays fine. They have analog lines hooked up to a combo card. Another issue with it is that it is not disconnecting the outside caller when they hit the dead air so its tying up the line. Before I rebuilt the card...

Just did an 8.1.64 install with essential editon with embedded voicemail. For some reason this simple install is being a PITA. It is set up when you call in it hits the main hunt group and after 20 secs the main mailbox should answer. After 20 secs, you just hear dead air but a recording is...

new update, it appears we had windows 2008 R2 installed. created a new virtual server and put 2008 on it and the iphones now connect just fine.

Still cannot connect, its just spinnin. After doing a port scan, 8069 is indeed open.