Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Go1dFinger

  1. Go1dFinger

    Clearing ARP on TN2602

    Is it possible to clear the ARP Table on a TN2602?
  2. Go1dFinger

    What Action is Needed on Alarm in Audix4.4

    I monitor the PBX/ VM with Alarmtraq and I am getting a repeat of a MAJOR Alarm from the Audix 4.4. It is "INADS Event 4 count 30: Major Alarm - Voltages(s) outside range". I have searched high/low to get an explanation for this Alarm but the documentation does not expalin the ALARM or how to go...
  3. Go1dFinger

    RAS Question

    Thank you for the response, that is also what I beleive but I am being told by the onsite Tech that the Modem is plugged into the S8700. I will send a Tech to investigate the issue. Thanks again for the response. Cheers
  4. Go1dFinger

    RAS Question

    Something strange is going on when I RAS into an S8700. I use to be able to RAS in with Login/ Password but now when I try to RAS I no longer get the standard Login I get "Enter Login Name". When I type in the normal login/ password I get disconnected. Does anyone know why I am getting "Enter...
  5. Go1dFinger

    Queue Length?

    Sorry for the late response...I thank both of you for the info/help. I understand what you are saying AvayaTier3, however I did not know this info, thank you for your insight and assistance.
  6. Go1dFinger

    Queue Length?

    Hello All - I hope someone has the answer to what seems a basic question. I have a G3V12 and I am unable to dictate Queue Length because Queue Length is not an Option on the Hunt Group Form. I have ACD-Y, Vectoring-Y and Queueing-Y, but no Field for Queue Length? Can anyone assist?
  7. Go1dFinger

    Admin SW Question

    Very useful kank, thanks for the info, much appreciated.
  8. Go1dFinger

    Admin SW Question

    Thanks slash50, that is the exact info I was looking for. Cheers!
  9. Go1dFinger

    Admin SW Question

    Thanks kank for the response, actually I may should have of probably not used the word "integration". I am trying determine what Software Application Ericsson utilizes for remote maintenance, such as Soft MAC's. I know that both Avaya and Nortel have such an application but I have no idea if...
  10. Go1dFinger

    Admin SW Question

    Hello all, I must say up front I am an Avaya Tech so anything about Ericsson is new to me. I have what I hope is a basic question: Does Ericsson have its own proprietary SW to Administer MAC's in the PBX/VM and if so what is the integration? Thanks for the answers.
  11. Go1dFinger

    User Shortcode ?

    Thanks mattKnight/amriddle you are both correct, ; was the issue. Thanks again
  12. Go1dFinger

    User Shortcode ?

    Thanks for the response amriddle, When I plugged in the User SC: 9N; 9Nsi5138675309 Dial 0 and then traced the User when she made the call (she called 9675309 it still matched Shortcode System, 9N which is setup as: 9N N Dial 50:Main I just do not understand why it is ignoring the User SC...
  13. Go1dFinger

    User Shortcode ?

    I have a Fax Machine and have setup User SC's for it so that you do not need to dial 9 before the number. They all work great except for dialing a 7 digit number with a leading 9 in the prefix (i.e. 946-5432). When you dial 946-5432 from the Fax it automatically see's the System SC 9N and tries...
  14. Go1dFinger

    SMDR Viewer

    Tom- Got it working, as you pointed out FireFox was the problem. Thanks again for taking the time to post.
  15. Go1dFinger

    SMDR Viewer

    Tom - Thanks for the insight I will give it another go. sizbut - I post to this forum when all other resources and practices have been tried with continued failure, I assumed that this is what this Forum is intended for, and to answer your question I did read the instructions, great advice.
See more

Part and Inventory Search

Back
Top