Recent content by gl3nc

Hi, Yes you will need to plug a device into the port and take it off hook for the port to register. Thanks Glen

I am now getting the same issue with Windows XP on a Toshiba Satellite Pro. I can connect to other machines fine, e.g. web browsing, terminal services, outlook. However if I ping from my machine to Machine B I get a response o.k. If I then Ping from Machine B to my machine I get no response! I...

Wayne, You will need to use AAR to re route calls. This will only work if you are out of bandwidth not if the link goes down.

What do you need to know? Give us some information.

Simon, Looks to me like you cant change it on the Callmanager. If you have an H323 gateway, you could setup an outgoing translation pattern on the gateway and then create an route pattern pointing at the gateway. This will then not show the translation to the user. The only way to restrict...

Hi all, Has anyone setup the new IPMA feature? I have been looking through the Docs for it and have a question. It says to put all the phones into an IPMA partition. Now I have two sites, linked via a ATM connection. I have a "internal" partition for each site. Do I still need to...

Hi all, Has anyone managed to get an ATA 188 working with dot1q. What my customer wants to do, it plug the ATA into the cisco switch, and have the Voice VLAN's for the analogue phone/fax. And then pass the data vlan out of the second ethernet port, to plug a PC into. This is the config I used...