Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by georgewkenny
-
Cisco 1841 - cannot configure IP on Eth0/1 as it overlaps WIC ip
Hi, thanks Braininms. It may sound complicated, but I am trying to achive configuring the router in the same way its predecessor was configured. WAN = 195.11.98.61/255.255.255.248 LAN1 = 195.11.98.62./255.255.255.248 Then LAN1 passes all traffic to firewall which is on 195.11.98.63. If you...- georgewkenny
- Post #3
- Forum: Cisco
-
Cisco 1841 - cannot configure IP on Eth0/1 as it overlaps WIC ip
Hi all. I have a Cisco 1841 which is connecting to an ISPs SDSL line provided with 8 ips. When I try to configure the ETH0/1 interface with the second IP in the range, the Cisco SDM tells me that this is "overlapping" with the WAN0/1 interface ip (although they are different) WAN is using 1st...- georgewkenny
- Thread
- Replies: 3
- Forum: Cisco
-
Annex B configuration on SDSL lines
European networks require Annex B config on the SDSL interface I understand? I cannot find where to configure the Annex A/B setting in the Cisco SDM configurator - can anyone tell me what command will change this?- georgewkenny
- Thread
- Replies: 1
- Forum: Cisco
