Recent content by genenj420

I have a small recording studio which has Sonar 2.0 xl recording software. When the program is first installed it wants to know the Midi in/out that it would be using. Once it's setup it works fine. Now I decided to connect to the studio pc from my home pc to do work remotly in the program. Now...

Hi all, I installed a Micro Trend virus scan and remover that detected the viruses but didn't clean them, no matter how the settings were changed. I did a virus scan online that didn't detect or clean the virus.I downloaded klez fix and other fixes that didn't detect the virus and didn't remove...

I can't seem to locate the 802.1x to turn it off or on. I followed to where you said to find it and I'm not seeing it. All I have is the firewall option from the advanced tab. Does that mean it's not enabled? I changed everything else and hopefully it will work better. Thanks gene

Hi Tia I would run a virus scan on the PC first to see if it finds anything strange. Also make sure 98 is up to date. gene

fantastic, great info. That link is importaint info to know. I bet it will work well now after I make the changs. I'll post the results. Thanks gene

Ahhh I missed that. I see it now. Thanks

OK so in ur router set the IP, subnet and gateway to that info the gave u. You will put that info in the WAN side of configurations. Then follow my steps above for static IP or DHCP on the client pc' on the LAN side. ALso you shoud have an option for PPoE in the router which u should be able...

No one can help? Bump

BCASTER I read that artical and one of it's major points is that it's secure because once it goes past the main electrical panel the signal dimminishes. Most likely they have a panel in each basement and the signal would be killed. 12 feet between floors is very resonable for wireless. I would...

you might need to put the username and password in the PPPOE configurations. The might be giving you wrong info by saying "PPTP" if they gave u a username and password most likely u need rto setup PPPOE which "logs onto" the netvision service.

ok Did they give you an IP address a subnet mask, DNS address and a Gateway address? They are giving you a Static IP (one that doesn't change at random) You should take this info and find the basic settings for your router. You should see (Obtain IP automaticlly)(or Specify an IP address) You...

I agree with JR your mising a very critical part of your system.

O my god b castner I was on the phone with verizon tech support for a total of 6 hours 6 HOURS I was on a router and i told them it's no big deal just test my signal I'm not getting dynamic info. She had me move the modem to every pc in the house. She really wanted me to do it on Xp cause it...

Does your ISP issue you a Static IP or Dynamic WAN = Wide Area Network. The info your pc is receiving from the RCA is the WAN. You either get the signal or you don't. When my WAN doesn't come up after a minute reboot I call the ISP. Each time I've come across this it has been something on the...

Ok i just read a thread that bcastner replyed to that said to use either Netgear utility or wirless zero. One or the other.