Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by gdezorzi

  1. gdezorzi

    BCMSVu R2V3.2 Dongle Problem

    We're attampting to connect a Single User Dongle to a XP machine using a Parallel Port Card, not the built in card on the chassis. The BCMSVu software does not see or recognize the Dongle. Could it be the use of a Card or the Dongle that is causing the problem?
  2. gdezorzi

    TN464F Error Message

    Thanks Kevin....I'll do it tomorrow. Where can I find what the error codes translate to?
  3. gdezorzi

    TN464F Error Message

    billybobdan Here's the test board results; test board 01c04 (page 1) 12/29/2009 5:42:07 PM TEST RESULTS Port Maintenance Name Alt. Name Test No. Result Error Code 01C04 UDS1-BD 138 FAIL 01C04 UDS1-BD 139 PASS 01C04 UDS1-BD 140 PASS 01C04 UDS1-BD 141 PASS 01C04 UDS1-BD 142 PASS 01C04 UDS1-BD...
  4. gdezorzi

    TN464F Error Message

    Thanks for your input....Why port 16 on this test and not port 24. I'll do the tests and advise, and I'm trying to get a loop-back plug made.
  5. gdezorzi

    TN464F Error Message

    Thanks billybobdan and wilsontec. Billybobdan what's with port 16...I thought port 24 carried the D channel. Wilsontec....I've never done a "check packet control card word or not"....how do I do it? Lastly....is there any special cable of cabling required to connect the ICSU to the Smart...
  6. gdezorzi

    TN464F Error Message

    Here's the "disp err board 01c04" Error Message: Port Mtce Name Alt name Error Aux Data First Occ. 01C0416 ISDN-TRK 03/16 1793 01C0416 ISDN-TRK 03/16 18 0 12/28-08:42
  7. gdezorzi

    TN464F Error Message

    Where does one find out what the errors codes translate to.
  8. gdezorzi

    TN464F Error Message

    This is a new circuit being provided by another carrier, and which we were unable to turn-up. I thought the trouble was at our end because of the OOS NE error message. Per 4merAvaya's request, I statused the Sig Grp and did a Reset on the Board. Here's my results: STATUS SIGNALING GROUP Group...
  9. gdezorzi

    TN464F Error Message

    I've busied and released the board, but never re-set it. I'll give it a try tomorrow as well as statusing the Sig Grp. Someone else to me the OOS NE indicated it might be a wiring issue.
  10. gdezorzi

    TN464F Error Message

    I'm getting the following error messages when I status the Trunk Groups associated with an ISDN/PRI, and test the board. 03/01 01C0401 out-of-service-NE no 03/02 01C0402 out-of-service-NE no 03/03 01C0403 out-of-service-NE no 03/04 01C0404 out-of-service-NE no 03/05 01C0405 out-of-service-NE no...
See more

Part and Inventory Search

Back
Top