Recent content by gcunning

I repeat my message above. I have not been able to delete these files once they get corrupted. I am pretty positive this is realted to the FAT, The drive "forgets" about these files and simply cannot remove them. I have tried about every DOS trick, utility and proceedure you could...

The PCI video card should give you enough signal to go into the bios and change this setting. Sometimes windows and other OS's wont be able to use the add-on card until it is disabled in the bios, others work just fine. It will usually be burried in a sub menu, of onboard devices. and could be...

No you shouldn't but I would set a static sized one of say 128-256 MB depending on what you have available. This will keep it from slowing down your system, but should avoid errors if a program does somehow require it. I posted the below in answer to another question hope it helps.... You...

Gee... and I thought I had given several good examples of poor behaviour on their part that I thought made them a bad employer to work for. "blatant hatred" Try blantant support. I was unaware topic threads in this section were kept so to task and to not comment on aspects of ones...

This is the place "the water cooler" to state opinions right? The topic was "employees say micrsoft is great", my opinion who cares? I don't take a competitors word for gold. If you have a company, (say MS) who makes false claims about their competition (remeber fake...

My point was that MS behaves badly, the opinion of the people who work for it don't really count to me. I care more about what a customer or competitor thinks of a company. MS has used very heavy handed, and many believe unethical, and illegal tactics in business. I don't think someone who...

Thank you both, I stand humbly corrected. I was not aware that manufactureres had upped the gauge for CAT 6. I would still contend that 250mbs is better than 100. Take into consideration the gig cards were free for us, so being able to up our speed for free was nice. My point about standards...

Artic silver is the name brand, the generics are just as god, but hlaf the price, just make sure that it contains in the higher 90% of silver content, and that the sivler is 99.9% pure, or close. I would not spend more than a few buck on a cooling solution, new cards that surpass yours without...

Search the web and use different drivers, there are usually several different versions that will work.

Here is the US just look at the FCC ID, it may be there anyways. Find the FCC ID that is printed on the board. Use google to find the FCC ID search page, this will tell you the model and manufacturer.

Can anyone give better information than "they are different"? The physical connection jacks appear to be identical to me regardless of the rated speed. Is there something I am missing? I have seen very slightly differnt gauge from manufacturer to manufacturer, but I have not seen any...

The negotionation is done by each switch, if they are both trying to do it it may not work, try turning off the auto-nego on the Cisco, and see if that does it. Also confirm that both devices do indeed support 100/full

I am a novice at VOIP, but at a cursory glance, look at your programming, ________________________________ translation-rule 111 dial-peer voice 111 voip preference 1 translate-outgoing called 111 ________________________________________ Here are 3 reference to 111, one of them must be...

IF this is such an itermittant problem I would look at intermittant reasons. Is there some power source in the ceiling interferring? A HVAC that runs when its hot? Is there condensation or water getting to your wires or contacts at some point. If there are HVAC vents in the same plenum area you...

Cat5 and Cat6 simply refer to the number of twists in the wire. These twist help keep the signal clean. It is possible to run faster than the wire is speced for. I have been able to run tests of 350mb+ over regular CAT-5 wiring. This was with somewhat realistic traffic patterns, and not too...