Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by gavin77

  1. gavin77

    multicasting on cisco 2960 switch

    Hi all, been a while since i have been on here or touched any cisco gear! used to get all my pix config / help on here! I have a cisco 2960 switch, managed to log onto OS using putty terminal, I got into conf t, ran "ip igmp snooping" "show run" gave me my config that showed snooping enabled...
  2. gavin77

    Pinging VPN pool users

    source ip will be on either 10.99.25 / 26 ranges, only a few servers / workstations on our LAN that have direct acces to the PIX anyway, which of the above commands recommended will work best?? cheers
  3. gavin77

    Pinging VPN pool users

    User Access Verification Password: Type help or '?' for a list of available commands. sheffpix> enable Password: ****** sheffpix# show config : Saved : Written by enable_15 at 11:12:05.796 UTC Thu Dec 14 2006 PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside...
  4. gavin77

    Pinging VPN pool users

    Hi, I need to set my pix up so I can ping users connected to our VPN pool and also get a echo reply from them, VPN pool - ip local pool vpnpool1 172.31.254.1-172.31.254.8 would access-list permit icmp any vpnpool1 echo reply work? CHeers, Gav
  5. gavin77

    PIX 501 access issues

    Hi there, I need to be able to ping users in our vpn pool so I can acetain who's staying connected for longer than they should and tying the system up for everyone else, would access-list permit icmp any vpnpool1 echo reply work? cheers Gav
  6. gavin77

    PIX 501 access issues

    all workin now, cheers!!
  7. gavin77

    PIX 501 access issues

    Cheers, sounds good, have already removed previous commands relating to the translation etc in the PDM, just added these new ones so I'll check if the 3rd party got access now, I'll keep ya posted, Nice one, cheers, Gav
  8. gavin77

    PIX 501 access issues

    Ping working fine now, thanks, still unsure of the access list entries though as they look very strange via the GUI, I need to give access to sh-ex-01 (10.99.3.4) from an external ip of - 195.50.80.2, this ip has nothing to do with our company, the company in question need to gain access to...
  9. gavin77

    PIX 501 access issues

    Thanks, I'll try this mate, fairly sure that my isp will pass the traffic but something I'll look into for sure, from what I can see the other acl is for the router accesss to the pix as the routers on the 113 ip address, can I remove the incorrect entries I have added? Cheers
  10. gavin77

    PIX 501 access issues

    Hi everyone, Please help, I need to make some config changes to our 501, have been trying to get external access to one server from one ip for some remote support to 3rd party stuff, in trying to get this up and running I have also lost the ability to ping from inside the PIX to the internet...
See more

Part and Inventory Search

Back
Top