Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by FX45
-
Can't ping anything through VPN
add: isakmp identity address change: vpngroup vpn3000-all default-domain password to: vpngroup vpn3000-all default-domain something.com If you have internal DNS u can add this: vpngroup vpn3000-all dns-server 192.168.5.59 Can u PPTP using w2k build-in client? Try to ping using ip address not...- FX45
- Post #6
- Forum: Security, hacker detection & forensics
-
Accessing our public web server from the internal network
Don't make any changes to DNS. Use DNS doctoring on the PIX when internal client want to connect to internal server using global IP. No changes to external DNS server are needed. Just add this to your configs: alias (inside) 192.168.1.10 xxx.77.0.28 255.255.255.255- FX45
- Post #7
- Forum: Security, hacker detection & forensics
-
Accessing our public web server from the internal network
If you can post your configs I'll tell you what is missed. Otherwise I'll have to guess :) It could be an issue with DNS name resolution. Let's try first scenario: Your clients are configured to ask external DNS server (i.e. your ISP DNS) and on their attempt to connect will ask ISP's DNS to...- FX45
- Post #4
- Forum: Security, hacker detection & forensics
-
Router > VLAN > Need a PIX ?? somewhere
Hi! With Version 6.3, you can assign VLANs to physical interfaces on the PIX Firewall, or you can configure multiple logical interfaces on a single physical interface and assign each logical interface to a specific VLAN. It supports multiple virtual interfaces on a single physical interface...- FX45
- Post #2
- Forum: Security, hacker detection & forensics
-
Can't ping anything through VPN
Can you access anything through VPN? I guess not :) After quick look at cfgs i can see "nat(0)" stuff missed :) I'm assuming you want to access hosts on network 192.168.5.0/24. If not, there is more work to do with this configuration. Try this: Create new access list for traffic...- FX45
- Post #4
- Forum: Security, hacker detection & forensics
