I'm not an expert with PIX devices since my company can't choke down the price tag but I do have the exact same configuration with the exception that I'm using a Netopia. If you can access from the inside but not the outside you need to make sure that your mapping is correct. In my case I...
Thanks everyone for your input here is another status update.
I have been talking with Chris Chapman at Linksys and this is our last conversation via email.
I think because this seems to be unstable that you may want to move to another alternative.
Chris
-----Original Message-----
From...
Everyone I think I have found the solution.
Last night about 2:30 am the tunnel had dropped again between LA and SD. So I decided to roll the firmware back on the SD RV082 to version 1.0.11.
So here is my configuration that has been working for 24 hours.
SD RV082
firmware 1.0.11
Default...
ChinchBug, thanks for your input. Gacollier. I have my MTU set to 1300. Im currently talking to my Wireless T1 provider to find out about some latency issues.
Otherwise here is the information that I submitted to Linksys this morning. This is there Tech to Tech service which reuires a pin...
Keying Mode Manual IKE with Preshared key
Phase1 DH Group Group1
Phase1 Encryption 3DES
Phase1 Authentication MD5
Phase1 SA Life Time seconds 28800
Perfect Forward Secrecy
Phase2 DH Group Group1
Phase2 Encryption NULL
Phase2 Authentication MD5
Phase2 SA Life...
gacollier
Your settings don't seem to be working. Now the tunnel says its up for hours and not traffic passes through. I will see it go down and then come up like 2 hours later. Could you please describe some of the settings that might be relevant to tweek. Im not sure how setting the...
gacollier.
Thank you very much for your reply. I made all the changes except for rolling back the firmware to 1.0.7. I'm going to stick with 1.1.1 for a while first and see what happens. I sure hope this stabilizes the tunnel. As far as giving up on the RV082 I don't think I can do that...
Could someone please post all the settings they have for connecting two RV082 routers using the VPN. The tunnel that I have between the LA and San Diego RV082 is constantly dropping and I need to resolve this issue soon as it is affecting our business.
At each location the RV082 is attached to...
Sorry in advance for the long post.
I recently called Linksys's tech to tech hotline to inquire about the RV082 router. The tech mentioned that it had two Wan ports that could be configured as a smart backup or load balanced.
My idea was to buy two Rv082 routers and use the Wan1 on each...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.