Hello,
In one of our conference rooms we are using a Polycom 6000 that was installed a little over a month ago. Our Mitel 3300Cx is fully up to date on it's firmware/os and I believe (will have to check when back on site) the Polycom is also up to date. Ever since the two devices have been...
Does anyone have a Visio template of a Bix connector QCBix1A and a 250 pair mount? I'm trying to document the telephone installation for a customer and want to use Visio. I checked on Belden's site but they only have CAD and PDF technical specs of a Bix connector.
Thanks
fs483
I tried running debug dhcpd event and debug dhcpd packet on the ASA while trying to retrieve an IP from a laptop and nothing was detected. To eliminate complexity, I removed the AP541N and configured one port on the switch to ACCESS Mode with Untagged VLAN 50. I plugged in my laptop and tried...
Hello,
I have a network consisting of an ASA5510 (V7.08)with security plus license connected to a ESW-540-24P with an AP541N firmware 1.9(1).
3 VLANs are configured :
- Data Untagged Vlan 1
- DHCP handled by Windows Server
- 192.168.2.x / 255.255.255.0
-...
Hello,
Have been doing some more reading and it seems the 25-pair cables actually ahve 6 4-pair bundles inside. I guess that answers my question.
Thanks,
fs483
Hello,
I have a customer that needs to move their current patch panel for voice and data from their IDF (a coat closet) to their new server room (about 60 feet away). None of the total runs (with the extra 60 feet added) will be more than 300 feet. They have 30 data runs and 36 voice...
Yeah I did google (always do before asking any questions online) but there are so many of them. I like feedbacks from people who actually read it and found it useful. Anything for Dummies are usual god starters but I do tend to find them too beginner for me. Do all the flavors of Asterisk...
I figured it out. For some odd reason, the original installer only allowed extensions where the first digit must be 1 and the second digit was either 0,1,3,5,7. I just added whatever digits that corresponded to the extension I wanted. Any good books that you can recommend for Asterisk?
Hi,
Got an Asterisk running on Ubuntu and wanted to add 2 Linksys SPA942 phones. I got the phones to register and they are able to dial out to an outside line and to another extension however when other extensions dials the new phones, it rings busy. I tried running Asterisk in...
Another question. If I make changes to a .conf file, do I need to restart Asterisk for the changes to take effect or do the changes take effect immediately on the dial plan?
thanks
fs483
Cool command busster. I actually found the location of the IVR prompts. They were located in /usr/share/asterisk/sounds/custom. Now how can I record new prompts? All the current prompts are in .wav files.
Thanks,
fs483
Hi Busster,
Unfortunately that folder doesn't seem to contain any files. Nothing shows up when I do dir or ls. Is there a config file that contains the paths that are used by this particular installation?
thanks,
fs483
Hello,
I was wondering if we can restrict an IP range (on the WAN)that can access internal server through SMTP? My customer uses a third-party anti-spam provider and we wish open the firewall only the IPs of the anti-spam provider on the SMTP port. I know how to do it on Pix and ASA but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.