Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by frelaxx

  1. frelaxx

    NAT-T with Nescreen 204 and Cisco 3xxx router

    We are trying to get a client connected to our network. Client is mandated to use NAT-T, we have tried for several weeks working with Juniper to resolve the issue without success. Juniper has given confrmation that the NS using NAT-T will not work in Main mode without certs so we will need to...
  2. frelaxx

    ASUS M2N-E SLI motherboard

    One long beep followed by 2 short beeps is a memory issue on the ASUS M2N-E SLI motherboard not a video. Found the memory issue and corrected it and I am working now. Thanks to everyone for their responses
  3. frelaxx

    ASUS M2N-E SLI motherboard

    My power supply died and I bought a replacement power supply. The one I had was a 450W which I couldn't find at my local PC store so I got a 500W one instead. I installed it in the machine and connected the connectors where I had removed the failed one from. When I power up the PC I get 3 beeps...
  4. frelaxx

    Application switching

    I have never worked with application switching before and wanted to see what information anyone may have on app switching. We have web based servers facing customers and I want to be able to redirect URL's with security when specific server become unavailable. I understand that there are...
  5. frelaxx

    copying large files

    Is there a quicker way of copying large files over a WAN using MS Explorer and doing a copy and paste?
  6. frelaxx

    network transfer difference between MS server 2000 & 2003

    I had a friend ask me why the data transfer rate is differnce between server 2000 and 2003. I thought I remembered reading something about some security restrictions in 2003 that affected data transfer rates but I wasn't sure. Does anyone have an anser?
  7. frelaxx

    DIaling from Outlook

    Does anyone know how I can configure my pc to dial my Linksys SPA922 VoIP phone using Outlook. I did this at my previous position using a MAPI client that was provided by the vendor (Mitel). Is there something on Open Source that will do the same for my Linksys phone?
  8. frelaxx

    Tunnel interface question

    I have a router that is multihomed between two ISP's, I am looking at the tunnel interfaces and I see a line "tunnel key 1" with no reference to what the key is. See Example: interface Tunnel1 ip unnumbered FastEthernet0/1 ip policy route-map policy1 tunnel source XX.XX.XX.XX tunnel destination...
  9. frelaxx

    Treaming NICs

    Can I connect the bonded interfaces to different switches to provide a level of high availability?
  10. frelaxx

    Treaming NICs

    I wanted to configure some of our server for HA using NIC teaming. I am running Red Hat 5 on Dell 1425 machines. Is it possible to do teaming on these machines?
  11. frelaxx

    506e pix port redirection citrix

    slick007 You didn't include the ACL for inside_access_in, it is possible that you are blocking the reverse traffic with this ACL.
  12. frelaxx

    Cisco 2811 bandwidth

    braininms The router is using a FE card and what I am looking for is the approx PPS that the processor can handle. Or as jneiberger has indicated as forwarding Mbps of data. And I have standard data and IPSec data. Thanks
  13. frelaxx

    Cisco 2811 bandwidth

    Does anyone know where I can find the bandwidth specs for a 2811 router?
  14. frelaxx

    Tethering a T-Mobile Dash to a PC

    I have been looking for definitive instructions for tethering a T-Mobile(HTC) Dash to a PC. Has anyone done this and where do you find the best instructions. What I have found already is incomplete or wrong. T-Mobile's web site is really usless for this, guess they would rather sell you a...
  15. frelaxx

    Restoring an entire exchange database from .bkf files

    I can see the individual mailboxes when I expand the backup. I can even expand down to the Inbox and directories below that, however I was told that since I am restoring to a new machine that doesn't have any accounts I need to restore the entire database and then connect to the mailbox I am...
See more

Part and Inventory Search

Back
Top