Recent content by fred8677

Skarlok, It's 96Meg. I would have to burn it on a CD. If you have a vendor, they should be able to download the latest version from Nortel's web site. If not, give me a mailing address and I'll burn you a copy. Fred "Wise men learn more from fools than fools from wise men

I've never heard of a 62 port MICB card. As far as I know, you can have 2 32 port cards. You can link the cards together in order to support a call with up to 62 participants. This requires 2 of the ports (link port and a transfer port). That's why it's only 62. Hope this helps. Fred8677...

Thanks!!! The nul statement worked great!!! Fred "Wise men learn more from fools than fools from wise men

Yes I have. It looks like it takes (no error messages), then I print the LDN again and it's still there.

Help.... I'm trying to delete Route 24 from my ICI key number 2 and can't find the correct command in LD15 to remove it. REQ: PRT TYPE: LDN TYPE LDN_DATA CUST 0 TYPE LDN_DATA CUST 00 OPT XLDN DLDN YES LDN0 2999 LDA0 LDN1 LDA1 ALL LDN2 LDA2 LDN3 LDA3 LDN4 LDA4 LDN5 LDA5 LDBZ ICI 00 R019 R023...

JC, FYI. It looks like D Channel 3 is configured as DMS100. You should be able to change this to NI1 or NI2. ADAN DCH 3 CTYP DCHI CARD 02 PORT 1 DES dch USR PRI DCHL 2 OTBF 32 DRAT 64KC CLOK EXT IFC D100 <--------- SIDE USR CNEG 1 RLS ID ** RCAP MBGA NO...

John, I think that's a great way to do it, I just don't know exactly where to start. I've never applied TOD restrictions on the RLI. Here's one of the routes I would want to restrict by TOD. FEAT rlb RLI 20 RLI 20 ENTR 0 LTER NO ROUT 8 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7...

irishhooligan, You must have a different version of Call Pilot. I have version 1.07 which has a client loaded on the administrator's pc. I'm not familiar with 2.0. I'll be upgrading in a couple of weeks. If I have any info, I'll share it with you. "Wise men learn more from fools than fools...

Your OM settings are on your administration client under "System Administration", System Performance Monitoring. Let me know if that's turned on to collect data. "Wise men learn more from fools than fools from wise men

Sorry techmk, I'm not sure what you are asking. Can you be a little clearer and maybe one of us can help.

Colin, I found your post (which is very helpfull). I set up the following and the only problem I'm having is bypassing the SAR. I can't find clear definitions for the different FFCs. Where does FFC AUTH come in to play? What about SADS, SAEN, SALK, and SAUN? I'm trying to block toll calls...

pbxadmin2, Did you find what you are looking for? I've been searching the forum because I don't have the installation NTPs. I'm converting 2 straight T1s to PRI in order to get caller ID. I've set up trunk groups before but no clue how to set up PRIs. If I find something helpful, I'll post...

pdulfo, This thread may also be related. thread798-842932 "Wise men learn more from fools than fools from wise men

I don't think there is a way to automaically detect the an analog device on the PBX. The way I cleaned up hundreds of analog TNs was to simply inform the company that we are going through an audit of modem/fax lines. I requested that if people are actively using modems that they inform me via...

svhtech, Sorry, I looked back at my original post. You already answered my questions. I should have looked at my original post in the first place. The problem I'm still having is that I can't personnaly test my config. I guess I'll have to take a trip up to the site one of these days...