Recent content by frankieg

Try adding a Hunt-NS button on the console or a phone, you have to program it as whatever the hunt group number is , in your case number 10. Dial 0 wont work as you have it set as a hunt group , if you want it to work i think you have to have 0 as an attndant group, in change dial-plan a then...

Thanks Baldwincl

Hi All At my work , I am supposed to be the Avaya expert, i was alright a few years ago, but havnt done much on the S8700, nothing on IP Office,so am now pretty rubbish, are these kits similar as to programming and logging on ect, anyone got a good link for system admin stuff at all. Thanks guys

Hi Thanks for the replies, If i do a list us ext 0 it says it has no data in the system to list, if i do a list extenion-type it shows 0 and 11 as Attendant. I cant delete either of them and as I added extn 11 as a temp dial code it has no other programming associated with it. Thanks

Hi All I had an operator consol on the reception, but found it was too much for the security guards to use, so i removed the attendant and created a station to take the few incoming calls we have, I changed the dial plan to have 0 as an extension , then tried to create extension 0 and put a...

Hi Ya I couldnt ask anyone on site to reset as they are a bunch of admin guys and wouldnt dream of helping out as this is my job and i should do it myself type people. i have tried the esc stuff and the password is not admin, we have no maintenance so a visit im afraid,,, thanks anyway

hi All I have a tracker 2700, whcih is locked, the site is 150 miles from me and i cant get there for a while, is there any commands to reset it remotely as the 2600 commands does. TIA

Hi All Does anyone know if the PC that is running Ultralink 11 S/W for wallboards can have its update speed increased? Mine is updating at intervals of between 20 and 30 secs, although the CMS is set for 10 seconds. Thanks

Thanks mate, you are the brilliant, saved me a lot of grief i voted for ya. Best Regards Frankie G

Hi All I am trying to load on CD the latest ASA and Val Manger, Integrated management 4.0 and admin tools 4.0.15. It made me delete my previous ASA, so i did that, then it went to load up and said i must upgrade VisAbility management suite 1.x to 3. i cant find this anywhere on my PC, can anyone...

Hi All Funny thing happens when u set the time on the server, i set it to the correct time, the about 3 mins later the server does a set time on its own and puts it backs about 10 mins, i have tried setting the time 10 mins faster , but the server then set the time, still 10 mins to early,, any...

Thanks Rgtrgt, can i just put a normal amphenol cable on, do i need to connect it to anything or just leave it unterminated

Hi rgtrgt it is set to yes, anything i can do to get rid of the major alarm on it, thanks mate

Thanks Guys, how do i dissble this alarm as i have nothing to connect to the Aux cable now.

Hi All , anyone got a link or anything for the pinouts of the Aux cable in a G3si, cant find it anywhere Thanks