Recent content by Fox1977

We have ISDN2e lines from BT

Hi there, Just wondering if anyone can help me with an ongoing problem I don’t seem any nearer to solving. We are experiencing a problem on our asterisk based phone system. Every Monday we come in and we are having a problem with inbound calls. After setting up our phone system to log to a...

It worked out that i was using accounts that had cached credentials (or same kerbos details)from when it was on the domain. When i created a new user and tried it with that user i could not see anything. Job sorted!

Hi there, Is it possible to hide the sysvol and netlogon shares on our windows domain network? We have a windows domain on a subnet and another standalone server on the same subnet that will be managed by someone else. I am just carrying out some tests and from the standalone server and they...

Hi there, I am running a Dell 1950 series 3 with an emulex fibre card in it running against a SAN. I need to disable a fibre card so that i can install vmware esx safely onto the local storage. I need to make sure that the fibre card is disabled as I do not want to install ESX on the wrong...

They go through a trunk port to the firewall and they are on a sub interface. The firewall cannot route between the two subnets at the moment. We are hoping to get the firewall swapped to another model that can route them in the next month. thanks

Hi there, Just wondering if anyone could help me with a problem we are experiencing. We have a windows server running with two NICs on two seperate subnets going out on two different VLANs. Both NICs have different gateways for each subnet. The firewall cannot route between the two firewalls...

Hi there, I have a windows 2003 server with two network cards in running on two seperate subnets. These are running behind a firewall that (at present) doesnt route between the subnets. I have had to add the second card to the server in order to add the additional subnet as we needed to use...

Hi there, Just wondering if anyone can help me out with this issue. I have 15+ servers running on one subnet /25 that is running behind a cisco firewall. We are close to using all of our IP addresses and i have just managed to secure a /24 subnet. I am trying to figure out the best way to...

We run a similar the same setup - 2003 x64 with sql 2000 x86. We have noticed a major bottleneck where sql will only ever use 2gb of ram. After three years we are nor going to upgrade them to x64 sql. Not too sure how 2005 will rn though.

i tried setting up the second network card to run on a different vswitch. I was able to connect to the server on the new IP address and I could see the virtual machines. The problem was i could not see the remote consoles. Is to so with them running on two different switches? I have made a...

Hi there, Just wondering if anyone can shed any light on the rather confusing licensing setup of the VMware range of products. I am planning on running about 3 esxi servers and migrating about 5 servers to the boxes. I was thinking that i could initially run them on individual ESXi boxes to...

How do i go about setting up the interfaces so that the machines are bound to one interface and the management console is running on the other one? I have just had a look around the web console but i cannot see any config options. I will have a look in the VI console later on when no one is on...

Hi there, Just wondering if anyone can helpme out with a pretty major problem we are having with out ESX server (3.0.2 build 52542) and VI Client 2.0.2 (Build 50618). We are currenly running about 5 vm machines running windows 200, 2003 and 2008 server. One of the servers is used to store...

Hi folks, Just having some problems implementing roaming profiles on 2008. I have got it sorted on 2003. I have taken the same setup and applied it to the group policy. I have done the following: In the user settings in active directory: Profile - \\servername\profile$\%username% Home - U...