Recent content by Fotoziam

Additionally, you may be interested in this site which list all current in use mandatory, voluntary area codes and programmed splits. A lot of good information here including individual CO prefixes (NXX's) www.nanpa.com I check it periodically to determine what, if any changes, will be...

You should be able to put the DWC key on a phoneset more than once. Remember to change the ACDN (KEY n DWC xxxx)to the second queue.

Highlight the line that you want to synchronize. One of the options on the menu bar at the top has Synchronize. YOu want to synchronize the selected line "TO" the switch (update the switch with the change). Your MAT documentation should explain this clearly under user...

DID YOU SYNCHRONIZE THE CHANGE AFTER YOU MADE IT? ALSO YOU CAN GO INTO THE TERMINAL AND USE LD 95. LD 95 REQ CHG TYPE NAME CUST USUALLY 0 CPND_LANG <CR> DIG <CR> DN EXTENSION NUMBER TO BE CHANGED NAME ENTER NEW NAME <CR> UNTIL YOU RETURN TO REQ: IF THE OLD USER WAS IN THE...

LD 20 REQ: LUVU (LIST UNUSED VOICE UNITS) TYPE: 500 (ANALOG TYPE SETS) TN: <CR> PICK A TN FROM THE LIST. BUILD THE PHONE OR COPY THE PHONE TO THAT TN. CHECK THE 66/110 BLOCK WITH A BUT SET OR AN ANALOG PHONE TO MAKE SURE IT IS WORKING. COMPLETE THE BUILD BY DOING THE CROSS-CONNECT...

I assume that you are getting the LOGI and PWD prompts. The default PW is 0000. Other than that, you are going to either have to go to Northern Telecom or research the origin of the machine to try and get the password. Wish I could be more help.

LD 95 CHG NAME x x x DN 6131 ENter the new name

Many times, tech will write the password on the underside of the terminal keyboard. Is this system in service or are you preparing it to be placed in service? The source of the system might be able to help you with the password also. Good luck - you are going to need it.

Not knowing the application's particular's, the only thing that I can think of is to build an analog hunt group FND and HTA to the next phone set in the group and have the last phone in the group point to the first phone in the group. Only one phone will ring at a time. Drawback - if phones...

User set relocation - unmanaged - can create a real nightmare. I would suggest that you disable this feature. You can not trust user's to keep you updated on the moves and it makes troubleshooting a real problem. Assuming that these are all digital phonesets, you might stat each DLC to...

Congrats - I will definitely file this for future reference

I believe that you can list these mail boxes by last date accessed. However, the simplist way I have found to clean up mailboxes is to list the DN's by Name and DN in the PBX (LD 95) then list all of the mailboxes in the voice mail system and create a deletion list for the voice mail.

LD 14 - if SUPN is Yes - Change to NO and VIve Versa You may also want to play with the SIGL setting.. Also look at MODE in LD 16 - I believe it should be PRA

If I understand correctly, you have a multiple line digital telephone and you want a number to ring also on an alnlog phone. If this is the case, you create a MIX by programming an analog TN with the same number, run the X-connects and connect a separate analog phoneset to the station jack. I...

IF you are using Meridian MAil or Call Pilot, you must set up a voice menu that allows you to select options. For Sales press 1 Now and the call is routed to a predetermined sales DN You can also thru dial (If you lnow your party's extension you may dial it a any time) and a DIal By Name...