Recent content by Fonguy

30DHC12 NAT

Purchased a used CICS to use at home, System up and running, Issue with the first Line Card Slot, CI card installed, when testing the lines, it rings as normal, but the arrow flashes only once, then disappears until the next ring cycle when it will ring and flash only once. I move the card to...

I knew about the 3.6/7 setting the date, but 4 basically was plug and play, I am leading towards corrupt files, but for educational, wanted to find out why and what may have caused or simply was an error when creating the new drive. Looking to exhaust all avenues before calling vendor and asking...

I check alarm logs and I do see the web server stopping and starting continuously. But to correct it? I have the old disk installed again and it is working perfectly, both element manager and through browser. I am going to reinstall the new drive and let the system download settings to it and...

did all that, it comes up with errors, saying busy or check firewalls. UPDATE I switched hard drives back to the old one and it came up perfect, no issue, browser and Element Manager all working no issue. Not sure but the description on system labels it BCM400 and it is for sure a 200. Only...

Alarms report Web Server shutting down and then restarting over and over

Forgot to mention that yes I have rebooted system afterwards. Trying to avoid blanking it and starting over

Bought refurb BCM200 Rel4 for home, issue with missing languages (Spanish) on voice mail, system worked 100% otherwise. Did a backup then installed the replacement drive that was sent to me from vendor. Went in easy and powered up fine. Programming was all there, had to add the new keycode...

Cathee, check in your browser setup under Configuration then System Properties, go down to Directory Search by and select both. This should be your answer. Regards.

DMZ is set to the BCM, also using a static IP. I have gotten the phone to initialize, and to make and receive calls,both internal, intercom between office locations and external trunk lines. I get just one way or no audio at all. thanks

Happy hour is on me, thank you, i owe you one. Cheers Fonguy

I will have the tech check. YOu know that makes a lot of sense. I will find out if there are line appearances or just a pool code (F649). I will let you know and friday happy hour is on me if you nailed it. Thanks, fonguy

We set up a relatively cheap mixer with multiple inputs, had the music source on one input, then used a free program from the internet such as w*namp or other equivalent, connect the pc with the program to an input on the mixer. it is important tomake sure the mixer has a voice override feature...

Tried doing a search but to no avail. I have a customer that has an 8x24 with 6 port expansion, 5 station modules and one trunk module. There is a NAM installed. The problem is that a call can not be sent directly to a voice mail box (feature 986) from any other set than a 7324. 7310, 7316,7208...

will give it a shot, you wouldn't by chance have a part number would you? thanks, fonguy