Recent content by Flow21

Thanks for the answers, guys! But it didn't work with the fdisk. Any other ideas??? Thanks in advance

Hi I want to install Suse Linux 7.3 on a Compaq Proliant 1600 Server. I have two 18.2 GB ultra-wide scsi Harddisks. But for some reason yast2 (and alos yast1) is only capable of recognizing 8.4 GB each. I tried to load the cpqarray module from the Suse 8.0 modules disk and also tried to boot...

HI Is there a possibility to make Outlook check your spelling in different languages automatically without changing sth. or pressing a button? Thanks in advance Florian

Hi I want to run a TACACS+ Server on win2k as! There is a dialup connection between two isdn routers (Cisco 800). On the one end there is the internal network with the CiscoSecure Server on the other end there is an external PC. Does this work? I´ve heard rumours that TACACS+ between two...

Thanks a lot you helped a lot!!!!

OK here they are: Router 1: ! interface Serial0 description connection to Internet no ip address encapsulation frame-relay no keepalive fair-queue ! interface Serial0.1 point-to-point description connected to CI-Labor-2 ip address 111.1.1.1 255.255.255.0 frame-relay interface-dlci 101 ...

I used the config you gave me: http://www.cisco.com/warp/public/125/frbacktoback.html I ping from router to router

Both are up line and protocol!! Status is static but i can´t ping!

This helped me perfect folks, but how can I check if there´s a conn. ? The show commands show all the relevant things, but i can´t ping

Hi How do I establish a Frame Relay connection between two serial ports (ports on two Cisco 1720) without anything in between? Greets Flow21

This is basically what i want! I´m trying to establish the Cisco Security Lab

That´s the prob I don´t have one! Line 97 should be something like line con or line aux or line vty

Building configuration... Current configuration : 1255 bytes ! version 12.2 service timestamps debug datetime service timestamps log uptime service password-encryption ! hostname NAS-Labor-I ! logging buffered 4096 debugging aaa new-model ! ! aaa authentication login default enable aaa...

I´ve done that, but which ip-address do I have to asign to the interface, and do I open the connection when I use this address as the destination?

But how does the router know to use the dialer interface when I want to establish a e.g. telnet connection ?