Recent content by flori1

Nortel MICS: customer has a mics 7.0 with a CID card for lines 1-4 provider verifies caller id is arriving, when an incomming call comes in the phones ring but in display only shows a bracketed V {V} I dont see any caller id programming in "lines" only in Terminals and sets under " Telco...

Recently installed an IPO with 11.1, mix of 9508 and J179 and ....5 k165's ,2 issues #1 when being called they ring only 1 time, then for the remainder of ring it's like in DND,only 1 audible ring but you can see it continuing as a silent incomming call,yes, it can be answered during that...

customer has BCM 50 rel.3, 4 pots ;lines in pool-A, incoming calls answered immediately by AA,they want 0 (ext 267) to ring 2 times,then forward to other exts ,then to ext 267`s mailbox,...so i made hg01 (461).,added members she wants to ring after 2 rings, cfna to 461 after 2 rings, hg01...

On nortel flash and call pilot vm in aa,for instance,"for hours and location press 3" called an info path. How is that done in embedded using "action" Thanks,Flori

Thanks, I did a startup before I swapped it,thats why i thought it was strange not to have it waiting in external codes,I'll check desti and park codes in the AM tomorrow.

hi, customer has a mics 4.0 with a fiber nam,after long power outage it comes up default,so I swapped the 4.0 with a 7.1 and the Nam with a Call Pilot 150,Only problem is that the digit 9 is not available in external codes only 3,4 5 or 7, they have 7 lines with no line appearances so i...

ipo basic 9.0 how do you change the ring mode of hunt group 771 from rotary to seq. there Must be a way but i cant make it happen thanks,Bob

My bad, of course there is a 24 volt power supply for the horn. Sorry i forgot to mention that. Is there any thing else in programming?

Customer has basic 9.0, wants external paging with valcom 1030 horn, in programming at aux. Equipt I make loud page for analog ext #16,but no page ,what else am I misssing?

hi,I have done a few installs of IPO,1 large w/ 6 expansions and tcm8,ip sets and digital and also a few small ones,I am a Nortel Bcm,mics and CICS vetran, here is the issue/question,I have received 4 IPO controllers, 3 are where in Basic mode..9.0, 1 in essential mode 7.0..(27)the Essential 7.0...

my system on the bench is IPO 7.0 Essential, in File, Advanced, erase config, and now I am unable to login, it attempt and comes back with access denied, any suggestions? Thanks,Bob

What is the best next step when you or the customer does not know the user name or pswd on an 200 3.7 ? Is it a level 2 reset and buy a cheap key code in order to get the old ones and then reprogram ??[indent] Thanks,Bob

The situation is one PRI two different companies with one receptionist when company " A" goes home early how do I forward their main DID to their answering service with a one-button touch for their receptionist.currently both company DID,s incomming call route to the reception ext# 201.

tomorrow I will be Deinstalling a dual cabinet option 11,my question is:are they wall mounted with a Bracket... similar to a Nortel MICS? Or screw mounted from inside the cabinet,Ive never installed or even had to move one,just adds ,moves and changes forever...