Recent content by FireTec

How do I stop the 9040 from beeping after a call comes in and it is not answered or door phone is activated and not answered by 9040? I turned off reminders. Thanks everyone!

How do the engineers determine the max volume of the system? Is it hard coded or soft?

The answer to Syquest is yes, all station are exibiting the same problem.

Is there a way to increase system wide station volume? I have a client with 20 34D phones and he cant hear very well. Trying to get away from Hearing impaired devices. Maybe a special code in programming?

I have an ACS R8 upgrade card. When I insert it into the module and power up, it does nothing. Has upgrading changed? Thank you

The video system needs ports 80,554,& 1600 open. I tried using the 4200 but had no success. It seems every time I have that senerio I need to install another router. Thank you!

I have 1 static ip, tried to use the 4200 to allow access to video, with no sucess. Therefor I put it in bridge mode and used the linksys to get in. What would the IP scheme be then? John

have 2 Linksys wrt54gs Routers, 1-Speadstream 4200 modem configured as a bridge. The first router is configured as ppoe and retreaves a static from isp. It has 3 ports opened to internal address of 1.2 for wan access to a video recorder. I need to add wireless capabilities for the lobby...

I have 2 Linksys wrt54gs Routers, 1-Speadstream 4200 modem configured as a bridge. The first router is configured as ppoe and retreaves a static from isp. It has 3 ports opened to internal address of 1.2 for wan access to a video recorder. I need to add wireless capabilities for the lobby...

I have 2 Linksys wrt54gs Routers, 1-Speadstream 4200 modem configured as a gateway. The first router is configured as ppoe and retreaves a static from isp. It has 3 ports opened to internal address of 1.2 for wan access to a video recorder. I need to add wireless capabilities for the lobby...

I have 2 Linksys wrt54gs Routers, 1-Speadstream 4200 modem configured as a gateway. The first router is configured as ppoe and retreaves a static from isp. It has 3 ports opened to internal address of 1.2 for wan access to a video recorder. I need to add wireless capabilities for the lobby...

First, I want to thank all who participate on this web-site. You insight is imeasurable. I have a site that consist of 2 routers connected to 1 broadband connection. I need to access a video machine from wan that sits on one of the routers. I have port forwarding on the router pointing to the...

Win98SE, peer to peer, 10 machines all running 98se, network switch. How can I block certain users from browsing network neighborhood? All they need is the network printer/fax. Thank you!

They are included into calling group 1, because PM transfers to that group on dial 0 time out.

When I installed PM 1.0, I had to use the 4 calling groups to route calls from 4 sub-menus. When I did this, I lost the capability to all page to them. Why, & is there a fix? Thanks.. 1-P2 with 2nd carrier, 7-206, 1-PM 1.0