Recent content by FinnSloss

I have installed the version 6.00 firmware and had the following results: MP118_SIP_F6.00A.023.007.cmp This firmware worked for outgoing calls only! Incoming calls caused the unit to crash and reboot (quite worying, thought I may have killed it)! MP118_SIP_F6.00A.047.003.cmp This firmware...

Reading the following post (bottom of page): Audicodes MP114 FXS SIP to CS1000 rls5.5 Identifies that the 20second problem is a firmware issue in v5.80. I will get hold of the v6.00 firmware from support and post my results here...

Hi there, Equipment: CS1000 Release 6.0 (fully patched) AudioCodes MediaPack MP-114 SIP 4FXS Problem: Calls placed on the CS1000 to the AudioCodes box fail after 20secs. Calls placed on the AudioCodes box work fine, forever! I have configured the AudioCodes device and managed to get it to use...

It has taken me a morning of racking my brains so I thought I'd share: ACD Agents can be given priority levels so that they certain agents are given the calls in preference. You can assign your supervisors higher priority, and your managers higher priority still. That means that the...

Can anyone shed any light on why there are no SIP Info messages being sent for DTMF tones? I cannot see them when doing a SIPCallTrace on the Sig Servers nor can they be seen on wireshark on the server endpoint. I've included the DCH and RDB below... Thanks, Here is the D-Channel print: ADAN...

Hi there, I am trying to get DTMF tones to pass SIP info messages over a SIP trunk, without success! There are 3 systems that talk to each other via SIP: A CS1000T Rel 4.5 A CS1000E Rel 4.5 A Server with some Dialogic software (SIP endpoint). Does anyone know why there are no SIP Info...