Recent content by fellicciano

Hi, I have a MX-ONE 5.0 SP2 hotfix2 system with a more than 30 servers. Two of them are presenting problems and we need to replace HD. LIM Repair documentation says that I cannot repair multiple servers with that procedure, so i must use config_restore command. Is this a long time process to...

Hi, First, take a look at "--origin" parameter at this command line. maybe "001" could solve this problem. In case you got this range of numbers from your service operator provider, you can put only the four last digits (extension number) in --dest-number parameter. Case not, you can put the...

If i understood well, you cannot do it now because the telephone set is locked with a code. It's because, you could make a call using redial key option in dbc 213 telephone set that appears when you press nlog key. Forbidden to dial, forbidden to redial. Unfortunately you must to print with the...

Hi, ASU-E has two ethernet ports and one of them seems to be in failure. I just want to use the second one with the same ip address (As a backup, if i really need it). Is there any way to do it without re-install all the server? MX-ONE 5.0 Thanks!

Hi, Well, categories don't work this way. You must to customize them.

You must try to find something like a file called (mac of the device).cfg. As well as aastra.cfg and 6731i.st. It seems that you are redirected to this path cause you have a kind of provisioning.One way I believe you can try to discover if this path is working propely is reset the phone with the...

Is it a md110 system? Do you have base stations programmed in all of the lims?

It depends on the type of IP phone you have. If it's compatible, you can program MNS function with extension_key command.

It seems that your system connection isn't right. First,if your system is working but not able to access the data base from DMG software, try to check if your system has access to the DNA server. Also check if the user was created in the Primary domain controller machine and included in the...

If u have a DNA system you can set a batch job to do it for you.

Hi, I´ve been bored of this problem too. Base stations simply stop working and the replacement of such device is a frequent procedure here. I don´t know the reason of broken diod. Maybe there´s an error in the project.

My system has 5 lims. The lower led really goes down and we know that is a real problem. But the most important thing to us at moment is the knowledge of why it is so frequent.

Hi. I´ve noticed that our system has a weird problem with base stations BS330. The problems have increased during last months. They were mixed accidentaly with some chinese software version. I don´t know if it has relationship with the problems. The base stations were constantly in failure and...

i agree with rfpui.If the extension is an EX,i not sure about it,i think there is a way to block flash command in ICAT parameter, but as i said before i not sure about it..

can u repeat the question please