Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Fechtensport

  1. Fechtensport

    BCM 400 4.0 Free Run Alarm Code?

    We have had this problem on two of our customer sites. In both cases, the DTM would lose sync with the PRI/T-1 circuit for a second or two, and then sync back up. The free run error pointed to the carrier, who (of course) denied that THEY had a problem. Once we had a vendor meet, and they saw...
  2. Fechtensport

    Caller ID block on PRI

    I will check this out also... Thanks!
  3. Fechtensport

    Caller ID block on PRI

    Thanks Ric, I will check that out...
  4. Fechtensport

    Call pilot to Outlook

    Your users will have to enter their password for their mailbox each time they open Outlook, otherwise they won't get the VM and FAX, just the email messages...
  5. Fechtensport

    Caller ID block on PRI

    I have a customer who wants to block outgoing caller ID on her calls. They have a PRI, with routes built for outbound calls. The Verizon code is *67 to block CLID, and I can program that on a button as an external call (F*1), but cannot get the block to occur. I even tried adding the *67...
  6. Fechtensport

    Rls 1 T1

    You are talking about a LOT of trust in the step-by-step upgrade from R1/T1 to 3.0, then to 6.1, and then to 7.0/7.1 (I may have missed a step in there...) In my experience, especially if you have a lot of programming (like DID's, etc), you will be better off copying down the programming and...
  7. Fechtensport

    CP 100 is missing a date/time setting

    Thanks - I'll try that idea, and let you know.
  8. Fechtensport

    CP 100 is missing a date/time setting

    Yeah, I tried setting the time and date from a phone set as well as from a laptop... still no luck!
  9. Fechtensport

    CP 100 is missing a date/time setting

    Thanks - especially for the non biz settings. I have already set up the times EXACTLY as you posted, but to no avail (I tried this originally, but kept getting the same result. Only Sat and Sun are a bit different). Problem is only on Wednesday. I tried changing the dates by one day on either...
  10. Fechtensport

    Hunt Group

    I have not been able to get a CCR tree to route a call automatically, unless I set the HG DN to be the operator DN. I haven't tried this recently (maybe 3 years), so I'm not sure if that will work. Worth a try, anyway... FS
  11. Fechtensport

    CP 100 is missing a date/time setting

    A customer of mine has a CP 100 on a CICS. The Greeting Table 1 is set so that Greeting 2 begins a 7 PM each day excpt for Wednesday and Friday. The Friday setting works fine, but the Wednesday setting won't roll to Greeting 2 at 5 PM. I can force a time/date change on the system, and get Friday...
See more

Part and Inventory Search

Back
Top