Recent content by fatboy69

Hi All, I have a Cisco 2811 with CCME 4.3 and NIM-CUE module with CUE 3.2. I am trying to connect to the CCME using the CUE wizard and I get "Web Login Failed" and when I bypass the wizard and try and setup through the CUE interface I get "Login Failed - Unable to determine CCM version -1" I...

Make sure you use the T Ports as the other 16 ports are contended at 4 to 1. Not the best for high traffic switch interconnects. 10GB is overkill. do you know what type of traffic you are running over your network? FB

Hi all, I have a a bunch of 5406zl's with the exact same SNMP v2/3 settings. I can manage all devices pefectly from PCM-2.3+ without issue. But, two of the devices have routing and VRRP enabled, and these devices will not send sFlow data to PCM and continuley return "Sampler Owned" when trying...

Sorry, bum steer guys. After looking through the logs it is actually backing up 34GB which to me seems like it is not running compression. The drive is definatley set to run hardware compression. where can I see if compression is being used for each backup?

Hi, I am running Arcserve 11.5sp3 on a SBS 2003 R2 server with a HP DAT72 drive. I currently have 32GB of data including the exchange store. For some reason the backup seems to get to the same spot and requests blank media or <DAY> Seq 2. I have formatted the tape, erased the tape, everything...

Thanks Mark, the emulation of netware is purley astetic as these are very precious users and going from a script that displays progress to a hidden process will freak to many people out and our help desk cant handle it. Cheers Again.

Hi Mark, thnkyou for your reply. I am not really after a progress bar as such, just a window that pops up, displays each drive being mapped etc etc, and then closes when complete- the exact same way a netware script works. Also, the intranet.bat file is for desktop environment confnigurations...

Hi, Newbie here, I need to display the progress of a login script running similar to the way a netware login script runs. I know this is probably basic, I have jsut taken over from the old IT admin and I am totally perplexed. I have pasted in the script I am using. any advice or critique would...

Sorry, I should have stated from the start. This is PIX OS 6.3(4) not 7x, so there is no out statement I beleive. So let me clarify. I have removed my ACL for the inside interface. therefore I should be able to connect to hosts on the DMZ1 network. this does not work. I always understood...

Thanks for your replies guys. Quick question. if I have a rule from inside going out to the ip subnet of my Dmz1 then wouldnt that mean that I can connect to anything on that dmz network from inside and it would maintain the state of the connection therefore I do not require a return rule...

Hi I have a pix 515 that has 6 interfaces. 2 are shut down except dmz1, inside, outside and dmz3. I have migrated away from conduits and added ACL's and this is when the problem started. I am absolutley stumped as to why this is happening. I have been debugging connections and see nothing, they...

Hi, I have a Cisco CSS11503 content switch with 2 Web servers behind it. I currently use IIS logging on both servers and I am seeing in the log the source IP address being the CSS VIP. Both servers and the VIP are on the same subnet with the CSS plugged into the DMZ switch and the two servers...

Thanks for you're reply. Solved it by looking at every device in thier network and found a Catalyst switch undocumented that acted as a distribution switch and when I cleared the ARP cache on this device it worked perfectly. FB.

Hi, I have a bit of a wierd one with a client I am visiting. They have 3 pixs on my internal network. One is the Internet device which is providing NAT for the internal network. the other 2 sit on the internal subnet behind the internet pix. these 2 pixs are protecting another 2 private...

lucky I wasnt confident. no guts no glory, what a load of crap! Ghosting worked perfectly. SMSG. Using Ghost 8.0.xxx, created a bootable Ghost CD witht he Q57 Broadcom drivers. This was for a hardware swap between three servers, 1 being a staging server. I had 2x HP DL380G3's. Both with...