Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations danielledunham on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Fat Dave

  1. Fat Dave

    Can't access LAN programming on OS7100

    The LAN will not reset to factory this way, but you should be able to see them in mmc 830 (which you have access to). You can simply over ride the password using the date and time/6663 method (unless its over V4.99). You can then access through the lan port using osdm and change the settings as...
  2. Fat Dave

    Using OSDM.

    your address in deafault will be 10.0.2.10 , not 10.0.2.0. this will be your issue.
  3. Fat Dave

    7100 speed dials INVALID NUMBER

    Check LCR (MMC 710,711,712,713), Check numbering plan (mmc 724) to make sure trunk group numbers havent been deleted accidentally. try dialling the numbers manually, do they go through? Check speed dial entries in mmc 705 too, check the trunk group they are dialling is correct.
  4. Fat Dave

    No SLM (Analogue) ports working OS7030 base cab ?

    Ho many ports (trunks and extensions) are connected? If your over 20 thats why. Always worth making sure these 2 cabs are in Sync too. Not a fan of the twin cab 7030 its a bit flakey.
  5. Fat Dave

    Officeserv 7200 - How to change the hold music/sound while on Park

    Hi Kamran, 3.2.3 put MOH port number in here in default its 371 or 372 2.4.2 put MOH port number in here in default its 371 or 372 2.1.5 Change external BGM/MOH drop down to Ext Source.
See more

Part and Inventory Search

Back
Top