Recent content by farazshamsi

Hi, Anything else would be required to configure it. Please let me I am new in Avaya Telephony

Hi, should I made analog station and assign the Anlog port which is connected via Fax. Then fax is connected via PABX

Hi, Annyone let me know the procedure for both Analog as well as IP Phone to configure as Fax

Hi All, Thank for the input, My issue has resolved after adding the DSp resource command on cisco router

hi, Yes problem to be reported when cisco calling to Avaya Phone not being able to hear cisoo Phone Cisco Calling number 5904 Avaya Gateway 192.168.37.35 Avaya Calling number 8008 Cisoo Gateway 172.16.26.11 where Avaya PABX connected Call Flow: Cisco Phone ---sip--Cisco PABX---h323----Cisco...

Please find the below trace 17:58:19 idle station 8008 cid 0x2aa 17:58:22 Calling party trunk-group 3 member 1 cid 0x2ad 17:58:22 Calling Number & Name 5904 UT 1 17:58:22 active trunk-group 3 member 1 cid 0x2ad 17:58:22 dial 8008 17:58:22 ring station 8008 cid...

Dear Kyle Is might be Routing issue that why Avaya Cannot generate H225 connect message ? And how we can take packet capture on Avaya so please share the step in details Avaya Model:S8300 B G700 CM (4.0 Anyway thanks

Any Guru please help me in this regard

I have observed one way voice when we call from cisco PABX (A) to Avaya PABX (B) as Cisco PABX can hear the voice of Avaya PABX, but Avaya PABX Cannot hear the Voice of Cisco PABX.Although Calling from Avaya to Cisco no issue observed and below are the Call logs and detail so any one let me...

Call transfer is not working from Avaya to Cisco via H323 Trunk although calling is working properly from Cisco to Avaya. Also call transfer is working properly from another avaya to cisco so I have checked Both exchange the only difference in customer option file where supplementry service is...

I am unable to receive the Name of the Caller when I am calling to Cisco CUCM (28xx) series to Avaya (85xx) via H323 trunk even name is tagged on the cisco side. But from this Avaya (85xx) to Cisco (28xx) Caller name and extension show to other party.Also Call from other CME or Avaya Exchange...

Hi, I have enclosed existed URI details so please let me know. Any input would be highly appreciated.

Hi, Please anyone let me know.

hi, This is running envoirnment where I can receive call from the Cisco Gateway To Avaya IP Office, but unable to receive call from Calll manager to Gateway to Avaya IP Office where I receive intial 503 service is unavailable. I will try to make simple make sip trunk only between Call manager...

Hi, I am trying to make Simple SIP Trunk between Call manager and Avaya IP Office.I have made SIP Trunk On Cisco Call Manager and I need to receive this incoming sip trunk at Avaya IP OFFice so What configuration need to be done incoming sip Trunk at Avaya IP Office Any Input would be highly...