Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by faithful4u

  1. faithful4u

    access-list on with mac address on cisco 877

    hostname Nas_N_10MB ! boot-start-marker boot-end-marker ! no logging buffered no logging console enable secret ! no aaa new-model clock timezone Kuwait 3 ! ! dot11 syslog ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.99 ip dhcp...
  2. faithful4u

    access-list on with mac address on cisco 877

    how can i use access-list with mac address. i have LAN for one building. when ever i block ip address because of high traffic he simply changing the ip address then using again. so i want to block his mac address with access-list i did this but still not working access-list 701 deny <mac...
  3. faithful4u

    sh ip dhcp binding - mac address

    when ever i use -- sh ip dhcp binding -- command all my mac address list got 14 numbers like this.... 0100.1558.d276.5b. usually mac address is with 12 numbers, what do you mean by 14 digits
  4. faithful4u

    NVI0 INTERFACE ADMINISTRATIVELY DOWN

    I have two cisco 877 routers and Im using the same below configuration on both routers but one of the router's NVI0 interface is up and working but the other router NVI0 interface is administratively down. whats wrong?? both routers are same model 877 and configuration im using same. what is...
  5. faithful4u

    how to block utorrent p2p

    i want to block utorrent and bitcomet ports on cisco router. i search on google and i got default ports 6881 - 6999. i did blocked these ports but still the programs are working. i check the ports they are using ports like 4800.... please show me the procedure to block these softwares.
  6. faithful4u

    HOW TO BLOCK A SPECIFIC IP ADDRESS

    Thanks, give me steps how to block ip address on network from accessing internet and also how to block Mac address of that specific computer.
  7. faithful4u

    i cant disable interface on cisco router

    Current configuration : 2893 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Badar ! boot-start-marker boot-end-marker ! no logging buffered no logging console enable secret ! no aaa...
  8. faithful4u

    i cant disable interface on cisco router

    Badar#sh interface vlan1 Vlan1 is up, line protocol is up Hardware is EtherSVI, address is 001d.7088.9e89 (bia 001d.7088.9e89) Internet address is 192.168.1.254/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 2/255, rxload 1/255 Encapsulation ARPA...
  9. faithful4u

    HOW TO BLOCK A SPECIFIC IP ADDRESS

    give me the steps for standard access-list
  10. faithful4u

    VOIP SERVICES PROBLEM

    its a strange issue. i have 6MB bandwidth on three SHDSL wic cards, each can handle 2mbps on load balance. everything is perfectly working fine except calling cards. i mean to say that calling over voip softwares. examples-jumblo,net2phone,phoneserve.... when bandwith is below 2mb even this...
  11. faithful4u

    i cant disable interface on cisco router

    im getting nvi0 interface with assigned ip address tht i assigned to vlan1, i want to disable nvi0 but i cant login... can you please explain me what is the purpose of this interface and why im getting vlan1 ip there. thank you. NAS-Gents#sh ip interface brief Interface...
  12. faithful4u

    VOIP SERVICES PROBLEM

    IS THERE ANY ISSUE IN THIS CONFIGURATION FOR LOAD BALANCE?? I HAVE ISSUE WITH THE VOIP SERVICES. Current configuration : 4113 bytes ! ! No configuration change since last restart ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service...
  13. faithful4u

    sound issue with cisco 2801 router

    its a strange issue. i have 6MB bandwidth on three SHDSL wic cards, each can handle 2mbps on load balance. everything is perfectly working fine except calling cards. i mean to say that calling over voip softwares. examples-jumblo,net2phone,phoneserve.... when bandwith is below 2mb even this...
  14. faithful4u

    HOW TO BLOCK A SPECIFIC IP ADDRESS

    hi give me the steps that how to block a specific ip address and also a mac address. give me some details about access-list. thanks you.
  15. faithful4u

    ADSL connection on cisco router

    I have ADSL connection on cisco router on a remote location.but the problem is everytime i restart router dialer change ip. That make me hard to telnet/monitor the router. i contact the service provider they said its DHCP at their end. Is there any way not to release the dialer IP?
See more

Part and Inventory Search

Back
Top