Recent content by evildik

Any help would be greatly appreciated Scenario I have a domain called test.com and a child domain called what.test.com. RUS has been added on test.com for what.test.com and the domain has been prepped on what.test.com for Exchange Problem Clients on test.com domain using the Outlook client...

That is what i thought so the core router which is router 1 should be clock source internal on all interfaces and each outlying router should be clock source line?

I have a router that has a configuration of the following O----1----2 / \ / \ / \ / \ 3 4 Each number represents a router They are all connected with Point to Point Private T1's What should the clocking source be for each of these serial interfaces for router 1...

Question that needs some reading... pretty interesting problem This guy wants a VPN tunnel setup to my network which has a pix (6.3). He wants to route his FTP traffic to a internal host on my network using a NON RFC1918 ( he says he cant use it ) what hes telling me to do is create a SITE to...

Can the pix do non RFC1918 tunnel's? Using public address ranges? from a cisco router to cisco PIX using just the public address range.

Site and services with the correct ip subnets has been done. So its definitely something else... Really weird how random it is on which domain controller it authenticates to.. Did you try removing the SRV records that does not pertain to the correct site

Camera that is the exact problem im having.. have you found a fix for this? This problem is most annoying...

Topology is multiple sites (hub and spoke configuration) Spokes being the remote offices. We have a increasing problem where a user in location A will logon to the their server on the remote site, however when you type "set logon" in command prompt they are logging in to a Domain Controller in...

I have a terminal server cluster Windows 2003 Its strange because the auto created printers create fine. But not only can they see their own they can see all other users autocreated local printers. How do i fix this strange problem? Thanks in Advance

I appreciate all of your input. Will this work with destinations outside of the routes that the router is aware of? Thanks again for the help

Basically what i am trying to do is route E0 Traffic to go out S0 and E1 traffic to pass out S1 Network View is the following: S0 S1 \ / \ / ROUTER / \ / \ E0 E1 Does there need to be a default ip route? Do i need two? And is the following configuration...

Basically what i am trying to do is route E0 Traffic to go out S0 and E1 traffic to pass out S1 Network View is the following: S0 S1 \ / \ / ROUTER / \ / \ E0 E1 Does there need to be a default ip route? Do i need two? And is the following configuration...

Scenario is as follows 172.16.10.0 255.255.255.0 | Router Internet | | VPN Router | | Netscreen PIX 515 | | \ / LAN | WORKSTATIONS Netscreen 192.168.0.2 PIX 192.168.0.1 Everyone on the lan interface uses the...

I apologize the remote subnet is not 192.168.10.0 lets use 172.16.10.0 255.255.0.0

Scenario is as follows 192.168.10.0 | Router Internet | | VPN Router | | Netscreen PIX 515 | | \ / LAN | WORKSTATIONS Netscreen 192.168.0.2 PIX 192.168.0.1 Everyone on the lan interface uses the PIX as the...