Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by EvgeniyD

  1. EvgeniyD

    Backup/Restore Avaya 9670g

    Hi Everyone, I've have been trying to get the backup/restore working on our Avay 9670 phone with no luck. I made the following changes to my 46xxsettings.txt file: SET BRURI http://192.168.0.67/Phonebackup SET BRAUTH 0 When I try backup I get the following message on the IP phone: Enter...
  2. EvgeniyD

    Coverage After Forwarding does not work

    There is Avaya s8300 Server, Avaya G700 Gateway, all phones 1608. We have number, for example 1200 with coverage after 3 calls to 1207. But before leaving home, make a forward to number 1285. Finally gets a call to 1285 but after 3 call starts working coverage to 1207. Need to call stayed on...
  3. EvgeniyD

    Blind call transfer not working

    It works, thank you very much.
  4. EvgeniyD

    Blind call transfer not working

    There is Avaya s8300 Server, Avaya G700 Gateway, all phones 1608. For example we try to make a blind transfer frome number 1285 (transfer->dial the number-> put the handset down) to number 1286 but after picking up handset on 1286 we hear a dial tone. After this the call hold on 1285 on second...
  5. EvgeniyD

    MM711

    I resolved problem installed MM711 to another slot of gateway.
  6. EvgeniyD

    MM711

    I reinserted MM711. When I inserted back three LEDs blink red. Now list con all - no board again. Any ideas? I have free board number 001V4 on gateway. Can I insert MM711 in 001V4?
  7. EvgeniyD

    MM711

    Ok, Thanks! I will try do it.
  8. EvgeniyD

    MM711

    No, I don't removed and reseated the Module M711. The state no board happened after moving gateway to another location.
  9. EvgeniyD

    MM711

    There is Avaya s8300 Server, Avaya G700 Gateway, Avaya MM710 module and Avaya MM711 module. Everything worked properly. But it needed to carry all the equipment to a different location, change the ip address and the gateway to the P330, MGP and to VOIP server. After that, everything worked...
  10. EvgeniyD

    nec sv8100 + Asterisk

    Hello! Does anyone have experience of building the trunk between Nec sv8100 and Asterisk? I will appreciate any information.
See more

Part and Inventory Search

Back
Top