Recent content by etel

I had the same problem and I found that the UC 110 was at the worng release of software. I upgraded the IP Office to 8.1.52 and then upgraded the UC110 to 8.1.90-6. Once this was done I have not had the voicemail stop on the UC 110

No both are installed and running

I am trying to get ONE-X to be able to play the voice mail on the computer. IIS was no running on the server (2008) when I installed it. I now have IIS running and have removed Voice mail pro and reinstalled it, but in custom the web voicemail box does not show up. Has anyone run into this and...

I have the following: 500 v2 software 8.0.16 phone 8 card w/Pri on card DS 30 I had the configuration up and running and the customer unpluged the system to rerun power cables. When he plugged it back in the DS30 was not seen by the IP Office. Replaced DS30 same problem. Replaced both units...

Fixed with release 7.0.27

Has anyone used Level 3 as a SIP provider and gotten it to work, I have the incoming and outgoing working, but cannot get it to go to voicemail. Does anyone have a good configuration they could share with me so I can compare my configuration?

Has anyone set up a SIP configuration using Level 3 as the SIP provider? I have set up the SIP trunks and can talk both ways, but when it tries to go to voice mail I get dead air. Any help would be greatly appreciated

Yes I have started and stopped the service reinstalled voice mail pro and still have the problem

Has anyone run into this problem callers are not hearing the beep to leave a message. It does appear to be happening randomly at different mail boxes. IP 500v2 6.1(12) VM 6.1(20)

Has anyone worked with SoTel SIP trunking and gotten it to work? I can get it to work outgoing or Incoming but not both. Any ideas?

Has anyone set up VPN phones using a juniper SSG5? I am trying to and am to and am geting nowhere. I am using the programming set up for an IP Office as that is the closest thing I can find. If there is something better please let me know? Also the document says to uncheck h.323 but if I leave...

Have them use *5 to record the name

I have had this problem be sure to have them record their name with the *05 option.

I have installed a IP Office Partner version and have 18d sets on it. When the customer makes a station to station call or outgoing call there is a slight whistling sound in the background. HAs anyone else had this problem?

I am trying to set up a Sonic wall to a CM for vpn phones. Has anyone done this, I could sure use some help.