Recent content by etaketa

it wont. because your trying to do hairpinning. do a search on google for hairpinning and pix. the vpn users are coming in from the outside interface and then they want to use the internet and go back right out thrhough the same outside interface. the pix wont let it, except for the new...

then setup ISA PROXY server (thats within the microsoft framework)

Can you just try it. Install spoon proxy on one of your computers, then point the vpn users internet explorer proxy settings for the vpn connection to point to that Proxy server.. then let me know if it works.. do you need a link to download spoon proxy? here it is... its worth a try. i bet it...

I finally figured it out. I read up on the pix and the pix506 does not support Hair Pinning, that means data packets coming in one interface and going out the same interface again. So in order for my vpn users to surf the internet at the same time what i did was use a small program called spoon...

i went into the pix device manager and under administration/icmp i denied ping coming into the outside interface.

i dont want my pix's outside interface to respond to ping requests. how do i turn this off?

nevermind i figured it out. i had it configured wrong. it works now

I am using the pix device manager and by default all outbound IP ports are open. When it is set like this i can surf the net, but i dont want all outbound ports open, so what i did was to allow Http and https and www ports and now i cant surf the web. are there any other outbound ports besides...

Well I can tell you how to do this using the PIX DEVICE MANAGER (PDM), to get to the pix device manager type in https://ipaddressofyourpix and its a graphical windows interface. (i dont know command line that well) So what you need to do is get to the PDM and add a translation rule of your...

It should have one. just type in https://insideipaddressofpix example)https://192.168.1.1 or whatver yours is set to make sure to put the (s) as it is a secure connection and will only work that way. the default is to leave the username blank and the password blank until you change it. let me...

Does the 515 have a PDM inteface? Pix Device Manager Graphical Interface, because i can tell you how to setup vpn that way.

No I want to use the default gateway on the remote connection. I dont want to create a split connection. I want all end users to surf the net thorugh the pix. I was able to do this by using a proxy server and pointing the vpn users Internet explorer settings to point to this proxy. What I setup...

I figured out how to have them surf through the pix. What i did was setup a program called SPOON PROXY on another computer behind the pix and set their vpn browser settings to point to that computer. Im all set now. The PIX 506 doesnt support hair pinning which is packets going out the same...

I figured out how to have them surf through the pix. What i did was setup a program called SPOON PROXY on another computer behind the pix and set their vpn browser settings to point to that computer. Im all set now. The PIX 506 doesnt support hair pinning which is packets going out the same...

Hi there, I have VPN clients connected to the office PIX and they access some sensitive information on one of our servers but at the same time they have to be able to browse the Web. How can i allow them browse the WEB without split tunneling so their connection to the WEB to be encrypted? Can...