Recent content by ETAC

Perfect. Thanks ver much # cat redhat-release # Red Hat Enterprise Linux WS release 3 (Taroon Update 4)

I beleive it is redhat ENTERPRISE LINUX WS Version 4, but I need to confirm this.

I am trying to find a command that will give me the Linux OS and version. Uname -r gives me the kernel version but I am looking for somthing along the lines of the ver command in windows.

1) Enter the IP address in the node-names ip form 2) Enter the node-name and subnet in the ip-interfaces form 3) Enter sys-prnt in the ip-services form use port 9100.

I know this issue has been brought up before, but I can't remember if there ever was an outcome. We have been experiencing random problems with the TN2501 Announcement boards loosing their recordings. These locations are not connected to a network, and all recordings are done through the...

I have a 5ESS PRI which is delivering name and number. When the attendant answers a call the display shows "CALL FROM 604-xxx-xxx pc" (number only). If the attendant places the call on hold then go back to the call the display shows "TELUS 604-xxx-xxxx pc" (name...

You need to login as tsc, it is generally reserved for AVAYA tier 3 support. I have made the changes myself, you set the transfer field to digits. You will need to call AVAYA if you don't know the pass, and they will charge you a huge sum for a 5 second change that we should be allow to make...

Rebooting won't fix it. The easiest way is from the command line 1) disable tape 2) test tape clean 3) add tape.

what release are you running on the AVAYA and on the Meridian. Certain features did not work proper until R25 (Meridian) and MV1.1 (AVAYA). Were doing trials in our lab with QSIG and reporting back to AVAYA with our results.

We have both R10 and R11, there are some software advantages, mainly in the types of sets that R11 will support. The new digital sets for example are not supported on R10. If you are staying in the TDM world and not planning on going IP I would wait. New releases come out every 6 months or so...

Does AVAYA or a 3rd party make a device that allows you to hook an anlog device onto a digital port. Yes I know that the 64xx+M has a analog module you can use, but we want to get away from a digital phone all together. The reason is group-page, you can only program in digital sets. We want...

Make sure the dip swithes in the back of the cabinets are setup according the the instructions beides the dip switches and not the AVAYA documentation, because the documentation is wrong.

We have several customers that have TN2501 Val Announce Boards, they do not use the Val Manager to manage the announcements, but they record the messages by dialing the feature access code and recording the message through the handset. The problem is that the recordings randomly disappear, some...

Are you using analog trunks, if so connect a test set directly to the trunks and called the number. Also someone may have accidently put network call forward on, your LEC should be able to check that for you.

You should be fine with replacing the Processor. There is not much more you can do but wait till next week.