Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by enet

  1. enet

    Partner ACS - Incoming Call Issue

    Recheck signal at the d-mark then wiring to cpe.
  2. enet

    call pilot aa

    The auto attendant is answering the line here. Should'nt the CCR tree answer, where is that manual?
  3. enet

    call pilot aa

    Is that the CCR Tree? Two line LCD works. CCR Tree I believe is on the VM.
  4. enet

    Help with Nortel CICS : Do I have CLID?

    Could the nt5b41 card work here?
  5. enet

    Nortel BCM 50 need keycode retrieva

    Technically, the system ID is paired in a database with the original keycode to enable the BCM50. The only available without the keycode is the OAM port via ethernet eia/tia cable, ip address 10.10.11.1/255.255.254. Ethernet ports are not enabled without the initial keycode after a reset, the...
  6. enet

    Nortel BCM 50 need keycode retrieva

    Nortel BCM 50 need keycode retrieval, sys id 0016ca3e0a80 please advise!
  7. enet

    Binary software for security assessments

    Binary software for security assessments Any new software out there, ttl, ?
  8. enet

    Fast RAD firmware Upgrade

    Can anyone send me a copy of the firmware update @ enet@csi.com Frad not picking up with NRU 9,10,11 maybe its the firmware?
  9. enet

    Virtual or Phantom DN?

    I definitively ruled out forwarding a virtual set but you are able to transfer from a virtual set. This is useful to add virtual extensions that will ring and transfer to voice mail. I have not tested an ASM as the physical set to dtmf yet. Has anyone?
  10. enet

    Virtual or Phantom DN?

    Hi Marv0, I am trying to not have a telephone set for each DID line that i forward to a fax server. I forward via a VMI ok with a physical set but heard that it may be possible to have a 'virtual' or 'phantom' extension. I am thniking now that the Norstar will not let it happen this way. E
  11. enet

    Virtual or Phantom DN?

    Dudes, Creating a virtual or phantom extension to assign a target line. Who has done this and how? I have tried to create one by using an unused port but it says "not equiped' and the (target)line keeps ringing. Do i need to plug in a phone and then unplug it? Am I missing something? E
  12. enet

    MICS DID to Fax Server

    Hi, I am inplementing the same. Operationally, with a DID trunk card how does the modem connect to the port(s) and pass the digits to the desktop? DID-RJ11 to MODEM-LAN MAIL SRVER? E
  13. enet

    Call Pilot using outlook 2003 + Faxing

    Can you receive faxes to email also?
  14. enet

    Merlin legend and t-1 and line pool

    Thanks all for the responses. The problem was with the service provider who did not have ANSWER SUPERVISION enabled on the lines! Well, this only took what..2 weeks ha ha.
  15. enet

    Merlin legend and t-1 and line pool

    Hmm..I hope 4 TTR's will do the trick. About the ARS, is there an easy way to program all lines to go one route like say for local and long distance and for some lines to go another route for special calls like 911?
See more

Part and Inventory Search

Back
Top