Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EMJP's latest activity
-
EMJP replied to the thread Panasonic DT wiring.In a splitter, we always connect the pairs in sequence: P1 then P2 then P3 then P4, so we don't mirror the RJ45.
-
EMJP replied to the thread Panasonic DT wiring.PDF P145 Password = 2ufrompanasonic Each RJ45 of a DLC16 provides 4 extensions. Pair white/orange = ext 1 Pair white/green = ext 2 Pair...
-
-
EMJP replied to the thread Panasonic DT wiring.There are plenty of DLC 16 models, which Panasonic PBX is it for? TDA TDE NS NCP ?
-
EMJP replied to the thread ncp500 no voice.Increase the UDP timeout in your router + 180 seconds minimum?
-
EMJP replied to the thread Panasonic KX-NT546/543.I never had any problems with V2.01, are you sure the file is not corrupted? What model of Panasonic PBX do you have and what version...
-
EMJP replied to the thread "Integrate Panasonic TDE100 PBX mikrotik.The solution is to create a dual WAN in the router. One WAN for SIP and one for data; the Panasonic keeps its LAN IP address. I used to...
-
-
EMJP replied to the thread KX-TDE100 Canada last firmware and Maintenance console.I only have NE (North Europe) versions. However, if you're interested, I have a crack for Pana passwords. TDA TDE NCP, really safe, I've...
-
-
EMJP replied to the thread Panasonic KX-DTA600 call forward.Is the phone the only recipient of incoming calls on this analog line ?
-
EMJP replied to the thread Firmware KX-NT551.The PBX receives VLAN settings only from the connected switching hub. Therefore, VLAN settings for the PBX must be assigned at the...
-
EMJP replied to the thread Firmware KX-NT551.Your problem is quite simple: with the phone on the hook, press the "MUTE" button. If it is lit (red LED), you are in automatic answer...
-
-
EMJP replied to the thread Firmware KX-NT551.Select the target to update Apply / execute attached: PNT550 latest version (for NT55X) (ZIP)
-
-
EMJP replied to the thread Change display language on NT NS1000UK phones.For a while I received NS700/1000 UK version, to switch the phone displays to French I used this (included instructions and...
