Recent content by elmotec

I suppose HP allows it by default, but our HP workstations have a high customized installation from our principal. So I need to know what they have set to block remote X. Thanks

I use X-win32 to access the UNIX stations on our network. This works perfect for AIX and Solaris workstations. I also have 2 HP-UX workstations. When I use XDMCP I see them in the list of available workstations. But when I try to connect, X starts but stops after a view seconds (just before the...

Check the last rule in your $HOME/.dtprofile if this is: #DTSOURCEPROFILE=true then remove the "#" otherwise $HOME/.profile will not be sourced while you login.

Victor: Thanks for your reply! my temporary email: hh72736@elmo.nl Please send me the C program. Elmotec.

Victorv, Thanks for your helpfull reply, I can plot longer plots now (I also had to set the "paper size" to "inked area" in place of "software" in my plotter menu. But now the problem is, just as you mentioned, that catia forces 100% quality! That is not what I...

We have a Designjet 5000PS large format plotter. When I try to make long plots (about 7 meters) the plotter stops and cuts off the paper at 1330 mm. (The application we use is Catia V4). I figgured out that the default Max XY=1330x900mm. This value can only be overuled by software (the driver)...

hdisk1 is an SSL based hardware RAID5 configuration. We use the same in an other server and that one is blazing fast! The second point can be the real problem. On the RAID5 is an Oracle database stored. How can you increase the cache you mentioned? Or do you mean the processor cache itself?

Disk I/O differs a lot. The next data are just two snapshots: Disk Busy% KBPS TPS KB-Read KB-Writ hdisk1 50.6 388.7 70.6 40.0 348.7 hdisk0 22.5 141.0 27.5 0.0 141.0 Disk Busy% KBPS TPS KB-Read KB-Writ hdisk1 6.0 28.0 6.0 14.0...

One of our B50 servers (AIX 4.3.3) is pretty slow. I think this is because of the system is waiting (90 - 99%) for nothing. How can help? Output of "topas" is: Kernel 1.7 |# | User 1.2 |...