Recent content by elassad

I already have teaming with managed two NICs with only one MAC address. this the story

Thanks for reply. I used Adaptive Load Balancing teaming. Actually when Iam start ing to ping the two cardsare installed already, but when am took one of them, every thing works fine. By my last line I mean. When you start to ping from workstations in the LAN some of them working fine, but...

I have a multi-homed Compag Proliant 3000 server with two 1 GB Comag NICs. and I have Nortel Paspport 8600 Swith, I tried to make a teaming to the two NICs with NT4 SP 5 server. the teaming go well, but I have more than 40 workstation a lot of them this couldn't ping the sever, but part of them...

I have Multihomed with Two 1 GB NIC cards, connected to Nortel switch (Passport 8600 ) , I teamed the two NIC, I try to bing from different workstation to the server by it Netbios Name, some of them is OK, but other are not, also some times the already connected workstations, disconnected and...

I teamed tow I Gb NIC In Compaq Proliant 3000, and connected the two NICs to Nortel Switch Passport 8600, without trunking the two ports at the switch, I could ping the server from some workstation on the LAN, but others could not - no subnetting prooblem exist - sometimes one of already...

Actulaay I faced the same problem but in a different collection, I have Passport 8600 with 2 GIBIC 24 sx modules I tried to connect a compaq server with 2 GB NIC (multihomed) I teamed the two NICs the teaming goes OK, but when am try to trunk the two NIC at the passpot, I cannot ping the server...

I have a very starnge , multi-homed Compag Proliant 3000 server with two 1 GB Comag NICs. and I have Nortel Paspport 8600 Swith, I tried to make a teaming to the two NICs with NT4 SP 5 server. the teaming go well, but I have more than 40 workstation a lot of them this couldn't ping the sever...