Recent content by Ehsaan92

The issue has been resolved by changing the trunk port between the PBX and the switch to an access port. After looking a the pcaps i can see the PBX is able receive the tag traffic 802.1q but upon its return it sends it as untagged which goes through the native vlan (data vlan1) and this way it...

Hi Gwebster, I wan't to avoid the routing here, that's why I am looking for solution to use single voice vlan associated with different data vlans. The data vlans will route through my PALO 3050 firewall as untagged and then Juniper will re-tag the packets upon the firewall egress interface...

Alright so the phone and the system is not culprit here. I might be setting up everything from scratch, do you know is there any documentation out there which help do the following: 3 Data VLANS for three different department, one voice VLAN to be used by all the three department. Switch port...

ok but on the phone it clearly displays it's contacting file server http 192.168.0.16 and there it shows 'no file server' and stucks on 'Discovery 172.25.2.1'

File server is on IP office and it's for Phone only, therefore i am asking the question whether the callserver and file serve should be on the same subnet? From what I understand is the when Phone boots up on the current working configuration is it talks to the file server through data vlan 1...

Ok Riddle01, Your given guarantee is not my solution :) I don't know who actually configured this box as I have only started to work for this company just recently. Ok On LAN 2 on the PBX i can see on the DHCP pool default gateway is not defined, the callserver is on VLAN 10 172.25.2.1/24 and...

Hi derfloh, hmm if this is the case than how come phones on data vlan1 and VLAN10 working just fine? there are stack of two juniper switch with virtual chassis and phones on the bboth switch works fine but not when access port data vlan 1 is changed. However your assumption does indicate that...

Can you explain why routing is required? since the IP phones and the callserver are on the same VLAN. VLAN 101 seems to able to talk to other VLANs just fine, i have Palo alto 3050 firewall which routes the traffic between vlans if need be and it doesn't read vlan header and junper does the...

@amriddle01 Thanks for your input. I think I have alreaady tried that but I will give another go. On the Avaya office options 176 and 242 are ticked as the AVAYA IPO is the DHCP server for the phone on VLAN10, is there anything else needs to be configured there? And also it's worth to mention...

Hi everyone, First I would like to apologize if my questions has been already answered on tek-tips but so far I couldn't find any info on this regard. Before I jump into the questions and what I want to achieve, I would like to give you an overview of our current configuration for the AVAYA...